1. Manuals
  2. Brands
  3. Sargent Manuals
  4. Locks
  5. PASSPORT 1000 Exit Device
  6. Installation instructions manual

Sargent PASSPORT 1000 Exit Device Installation Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
A8034G
04/16
Copyright 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
P1
PASSPORT 1000
Exit Device
Installation Instructions

Advertisement

Table of Contents
loading

Related Manuals for Sargent PASSPORT 1000 Exit Device

Summary of Contents for Sargent PASSPORT 1000 Exit Device

  • Page 1 PASSPORT 1000 Exit Device Installation Instructions A8034G 04/16 Copyright 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

  • Page 3: Table Of Contents

    (p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and SARGENT Manufac- turing makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.

  • Page 4: General Description

    P1 re-uses existing IEEE 802.3af PoE infrastructure, streamlines the installation process, reduces costs and components, and minimizes power consumption. Hardware Specifications • Complete lockset with on-board memory • SARGENT exit devices furnished for 1-3/4” standard; specify 31- and thickness for • Magnetic swipe standard with optional thicker doors multiCLASS SE reader and/or keypad •...

  • Page 5: Installation Wiring

    Passport 1000 P1 Exit Device Installation Wiring Installation Wiring Overview SARGENT Passport 1000 PoE P1 Typical Application Network Cable Surface Mount RJ45 Network Switch (802.3af) LMT: Lock Management Tool A. PoE frame harness assembly B. PoE data hinge from McKinney (patent pending) C.
  • Page 6 Passport 1000 P1 Exit Device Installation Wiring (Continued) PoE frame harness assembly (From McKinney) PoE door harness* (From McKinney) PoE data hinge (Patent Pending) (From McKinney) Passport 1000 P1 PoE Lock * Order of installation may vary. Refer to appropriate sections for instructions. PoE Lock Supplied by CI Certified Integrator (CI) supplies and terminates...
  • Page 7 Passport 1000 P1 Exit Device Installation Wiring (Continued) Frame Harness Installation Components and wire harness supplied by McKinney, Suggested installation: Supplied by CI Cut end / ceiling-side PoE harness: TIA/EIB-568-B Standard Wiring B-Splice Wire Pair Crimp Connector Number White/Orange Orange White/Green Blue RJ45-M...
  • Page 8 Passport 1000 P1 Exit Device Installation Wiring (Continued) PoE Door Harness Order of installation may vary. Refer to appropriate sections for instructions. Hinge-side harness connectors: • 4-pin male Molex connector • 6-pin male Molex connector with ground wire Lock-side harness connectors: •...

  • Page 9: Parts Breakdown

    Passport 1000 P1 Exit Device Parts Breakdown P1 PoE Lock with Magnetic Card Swipe With or Without Keypad ITEM No. PART No. DESCRIPTION 52-3583-[finish] Outside Escutcheon Assemby, mag stripe 52-3582-[finish] Outside Escutcheon Assemby, mag stripe and Keypad (shown) 52-4244-[finish] Outside Escutcheon Assemby, Mag Swipe, Keypad, and HID 125 kHz Prox 52-4759-[finish] Outside Escutcheon Assemby, iCLASS, keypad, mag stripe, Prox, smart card (MIFARE, DESFIRE) 52-4777-[finish]...
  • Page 10 Passport 1000 P1 Exit Device Parts Breakdown (continued) 8877/8878 x ET x Lever Design Passport 1000 Rim Exit Device ITEM PART No. DESCRIPTION REQ’D Cylinder Assembly (Reference Catalog for Available Cylinders) Lever (Reference Catalog for Available Styles) 97-4105 Exit Trim (ET) With Cylinder 97-4106 Exit Trim (ET) Without Cylinder 52-4845...
  • Page 11 Passport 1000 P1 Exit Device Parts Breakdown (continued) 8977/8978 x RT x Lever Design Passport 1000 Mortise Exit Device ITEM PART No. DESCRIPTION REQ’D Cylinder Assembly (Reference Catalog for Available Cylinders) Lever (Reference Catalog for Available Styles) 97-4107 Exit Trim (ET) With Cylinder 97-4108 Exit Trim (ET) Without Cylinder 52-4845...

  • Page 12: Rim Type 8877/8878 Exit Device Installation

    Passport 1000 P1 Exit Device Installation Instructions for 8877/8878 Rim Exit 1 Door Preparation Inside A. Verify Hand and Bevel of Door • Check hand of door The exit device is non-handed and the trim is field reversible. Left Hand Right Hand Reverse Reverse...
  • Page 13 Passport 1000 P1 Exit Device 2 Install Door Position Switch (DPS) Wood doors have 3/8” raceway to controller cutout and metal doors have 3/4” raceway to the controller cutout. Refer to template A7951. 1. Insert connector end of DPS through the raceway on the latch edge of the door (Fig.
  • Page 14 Passport 1000 P1 Exit Device 4 Mount Exit Device Chassis 1. Position exit chassis carefully, verifying that the ET spindle engages the lower hub of the exit chassis. DO NOT PINCH THE WIRE HARNESS. Inside of Door (Wood) 2. Secure the exit chassis with through bolts to the ET trim using (2) 1/4 -20 x 2-3/8”...
  • Page 15 Passport 1000 P1 Exit Device 6 Secure Exit Chassis To comply with UL certifications and for security: Fasten exit chassis to door using (4) #10 wood screws (for wood door) or (4) #10-24 machine screws (for metal door). Inside of Door (4) #10 Wood Screws or #10-24 Machine Screws (2) #12-24 x 1-7/8”...

  • Page 16: Chassis Cover

    Passport 1000 P1 Exit Device 8 Install Chassis Cover Secure chassis cover to chassis using (4) #8-32 x 5/16” oval head machine screws (Fig. 8). Fig. 8 9 Install Wire Cover (Wood Doors Only) 1. Position the wire cover plate above the chassis cover and covering the wire channel.

  • Page 17: Machine Screw

    Passport 1000 P1 Exit Device 10 Install Outside Escutcheon (with Optional Gasket) Note: Gasket optional, for non-fire rated doors only. For non-fire rated door applications, an optional gasket (Part number 52-0782) may be used as a weather seal between the escutcheon and the outside door surface. Peel off adhesive backing and attach to (outside) escutcheon.
  • Page 18 Passport 1000 P1 Exit Device Installation of Connectors CAUTION - Do not touch or allow debris to enter connector contacts. DPS (4-pin) Secure the following connectors to their respective terminals (Fig. 11A, B): A. Secure the 4-pin DPS connector. B. Secure the 10-pin lock body assembly connector. Ground Lugs IMPORTANT: Do not run wires through bottom hole in plate (Fig.
  • Page 19 Passport 1000 P1 Exit Device 12 Installation of Inside Module Component Assembly 1. Insert top tabs of controller into slots on mounting plate (Fig. 12A, B). 2. Ensure proper alignment of board-to-board connectors while pivoting bottom of controller toward door until tab on bottom snaps securely into place on mounting plate.
  • Page 20 Passport 1000 P1 Exit Device 13 Install Inside Escutcheon 1. Position inside escutcheon as shown (Fig. 13). Verify that all wires are positioned within the escutcheon to avoid pinching. 2. Attach escutcheon with (2) #8-32 x 1/2” T-20 Torx pan head screws.
  • Page 21 Passport 1000 P1 Exit Device Installation Instructions for Mortise Type 8977/8978 Exit Device 1 Door Preparation Inside A. Verify Hand and Bevel of Door • Check hand of door. This exit device is handed and is not reversible. Left Hand Right Hand •...

  • Page 22: Mortise Type 8977/8978 Exit Device Installation

    Passport 1000 P1 Exit Device 2 Install Door Position Switch (DPS) Wood doors have 3/8” raceway to controller cutout and metal doors have 3/4” raceway to the controller cutout. Inside of Door Refer to template A7951. 1. Insert connector end of DPS through the raceway on the latch edge of the door (Fig.
  • Page 23 Passport 1000 P1 Exit Device 4 Mount Exit Device Chassis 1. Position exit chassis carefully, verifying the chassis lift lever engages the mortise lock (Fig. 4B). DO NOT PINCH THE WIRE HARNESS. 2. Secure the exit chassis by through bolting to the ET trim with (2) 1/4 -20 x 2-3/8” flat head machine screws.

  • Page 24: Chassis Cover

    1. Slide cylinder through ET Trim and thread into the lockbody, rotating the cylinder clockwise. Cylinder should rest flush on ET Case. Note: SARGENT logo must be horizontal Outside of Door and on the top of the cylinder (Fig. 6B).
  • Page 25 Passport 1000 P1 Exit Device 8 Install Wire Cover (Wood Doors Only) 1. Position the wire cover plate above the chassis cover and covering the wire channel. Mark hole positions. Note: Make sure stamped side of plate is against door. Inside of Door 2.
  • Page 26 Passport 1000 P1 Exit Device 10 Mounting Plate Assembly 1. On the inside of the door, position the mounting plate over the indicated holes. 2. Feed reader and DPS cables through central opening on mounting plate (Fig. 10). 3. Route ground ring terminal from lock body through bottom of mounting plate and attach to bottom right corner using (1) #8-32 x 1-7/8”...
  • Page 27 Passport 1000 P1 Exit Device 11 Installation of Connectors DPS (4-pin) CAUTION - Do not touch or allow debris to enter connector contacts. Secure the following connectors to their respective terminals (Fig. 11A, B): A. Secure the 4-pin DPS connector. B.
  • Page 28 Passport 1000 P1 Exit Device 12 Installation of Inside Module Component Assembly 1. Insert top tabs of controller into slots on mounting plate (Fig. 12A, B). 2. Ensure proper alignment of board-to-board connectors while pivoting bottom of controller toward door until tab on bottom snaps securely into place on mounting plate.
  • Page 29 Passport 1000 P1 Exit Device 13 Install Inside Escutcheon 1. Position inside escutcheon as shown (Fig. 13). Verify that all wires are positioned within the escutcheon to avoid pinching. 2. Attach escutcheon with (2) #8-32 x 1/2” T-20 Torx pan head screws.

  • Page 30: Operational Check

    Passport 1000 P1 Exit Device 14 Installation of Rail Assembly 1. Retrieve harness from end of rail. Note: Harness has limited travel and can be damaged. 2. Attach harness to female connector on chassis. 3. Install rail and screws per exit device instructions. Note: This view shows rim exit device version.
  • Page 31 Passport 1000 P1 Exit Device Notes 1-800-810-WIRE • www.sargentlock.com • A8034G...
  • Page 32 Copyright © 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience.

Table of Contents