Table of Contents
Advertisement
Passport 1000 P1 Exit Device
6 Secure Exit Chassis
To comply with UL certifications and
for security: Fasten exit chassis
to door using (4) #10 wood screws
(for wood door) or (4) #10-24
machine screws (for metal door).
7 Connect Door Position Switch (DPS)
Connect DPS to harness (Fig. 7A and 7B).
To Controller
To Door
Position
Switch
Fig. 6
Wood door shown
(collar used on metal door only)
Door Position Switch (DPS)
DPS
To Lock Body
Fig. 7B
Inside of Door
Fig. 7A
15
1-800-810-WIRE • www.sargentlock.com • A8034G
Inside of Door
(4) #10 Wood Screws or
#10-24 Machine Screws
(2) #12-24 x 1-7/8"
Flat Head Screws
(Through-bolts
Cylinder to Chassis)
(4) #10 Wood Screws or
#10-24 Machine Screws
Mortise Lock Body
Connector and
Ring Terminal
DPS (Door
Position Switch)
Advertisement
Table of Contents
