Mounting Method - Emerson Quantum MP User Manual

Safety Product Mechanical
Information Information Installation
3.4

Mounting method

The Quantum MP can only be surface mounted.
If the drive has been used at high load levels for a period of
time, the heatsink can reach temperatures in excess of 70°C
(158°F). Human contact with the heatsink should be
prevented.
WARNING
Many of the drives in this product range weigh in excess of
16kg (35lb). Use appropriate safeguards when lifting these
models.
See section 12.1.20 Weights on page 149
WARNING
Figure 3-5 Surface mounting the size 1A drive
330mm
[12.99 in]
510mm
[20.09 in]
1
1. The two outer holes must be used for mounting the Quantum MP.
NOTE
With the SMARTCARD installed to the drive, the depth measurement
increases by 7.6mm (0.30 in).
18
Electrical Getting Basic
Installation Started parameters
1
573mm
[22.56 in]
222mm
[8.72 in]
Running the SMARTCARD
Optimization
Motor Operation
1
1
[0.97 in]
www.emersonct.com
Onboard Advanced Technical
PLC Parameters Data
170mm
[6.69 in]
25mm
Quantum MP User Guide
UL
Diagnostics
Information
83mm
[3.25 in]
406mm
[15.98 in]
Issue: A4