Table 2-4 Solutions Module Identification - Emerson Quantum MP User Manual

Safety Product Mechanical
Information Information Installation
2.6.1 Options available for Quantum MP
All Solutions Modules are color-coded in order to make identification easy. The following table shows the color-code key and gives further details on
their function.

Table 2-4 Solutions Module identification

Type Solutions Module
Feedback
Automation
(I/O
Expansion)
Quantum MP User Guide
Issue: A4
Electrical Getting Basic
Installation Started parameters
Color
SM-Universal
Light Green
Encoder Plus
Brown SM-Encoder Plus
SM-Encoder Output
Dark Brown
Plus
15-way D-type
N/A
converter
Single ended
N/A encoder interface
(15V or 24V)
Yellow SM-I/O Plus
Yellow SM-I/O 32
Dark Yellow SM-I/O Lite
Dark Red SM-I/O Timer
Turquoise SM-I/O PELV
Olive SM-I/O 120V
SM-I/O 24V
Cobalt Blue
Protected
www.emersonct.com
Running the SMARTCARD
Optimization
Motor Operation
Name
Universal Feedback interface
Feedback interface for the following devices:
Inputs
• Incremental encoders
• SinCos encoders
• SSI encoders
• EnDat encoders
Incremental encoder interface
Feedback interface for incremental encoders without
commutation signals.
No simulated encoder outputs available
Incremental encoder interface
Feedback interface for incremental encoders without
commutation signals.
Simulated encoder output for quadrature, frequency and
direction signals
Drive encoder input converter
Provides screw terminal interface for encoder wiring and spade
terminal for shield
Single ended encoder interface
Provides an interface for single ended ABZ encoder signals,
such as those from hall effect sensors. 15V and 24V versions
are available.
Extended I/O interface
Increases the I/O capability by adding the following to the
existing I/O in the drive:
• Digital inputs x 3
• Digital I/O x 3
• Analog inputs (voltage) x 2
Extended I/O interface
Increase the I/O capability by adding the following to the
existing I/O in the drive:
• High speed digital I/O x 32
• +24V output
Additional I/O
1 x Analog input (± 10V bi-polar or current modes)
1 x Analog output (0-10V or current modes)
3 x Digital input and 1 x Relay
Additional I/O with real time clock
As per SM-I/O Lite but with the addition of a Real Time Clock
for scheduling drive running
Isolated I/O to NAMUR NE37 specifications
For chemical industry applications
1 x Analog input (current modes)
2 x Analog outputs (current modes)
4 x Digital input / outputs, 1 x Digital input, 2 x Relay outputs
Additional I/O conforming to IEC 61131-2 120 Vac
6 digital inputs and 2 relay outputs rated for 120 Vac operation
Additional I/O with overvoltage protection up to 48V
2 x Analog outputs (current modes)
4 x Digital input / outputs, 3 x Digital inputs, 2 x Relay outputs
Onboard Advanced Technical
Diagnostics
PLC Parameters Data
Further Details
Outputs
• Quadrature
• Frequency and direction
• SSI simulated outputs
• Analog output (voltage) x 1
• Relay x 2
UL
Information
11