Emerson Quantum MP User Manual page 17

Safety Product Mechanical
Information Information Installation
3.3.4 Installation and removal of a Keypad.
Figure 3-4 Removal and installation of a keypad - Size 1 shown
To fit the keypad in a Quantum MP size 1 or size 2, align the Keypad and
press gently in the direction shown until it clicks into position (A).
To remove, while pressing the tabs inwards (B), gently lift the keypad in
the direction indicated (C).
NOTE
The keypad can be installed / removed while the drive is powered up and
running a motor, providing that the drive is not operating in keypad
mode.
Quantum MP User Guide
Issue: A4
Electrical Getting Basic
Installation Started parameters
C
A
B
www.emersonct.com
Running the SMARTCARD
Optimization
Motor Operation
B
Onboard Advanced Technical
Diagnostics
PLC Parameters Data
UL
Information
17