Mounting Method - Emerson Mentor MP Short Manual

Place finger-guard on a flat solid surface and hit relevant break-outs with hammer as
shown (1). Continue until all required break-outs are removed (2). Remove any flash /
sharp edges once the break-outs are removed.
3.4

Mounting method

The Mentor MP can only be surface mounted.
Figure 3-5 Overall size 1A dimensions
293mm (11.54in)
250mm (9.84in)
MA1
MA2
95mm
(3.74in)
1. The two outer holes must be used for mounting the Mentor MP.
With the SMARTCARD installed to the drive, the depth measurement increases by 7.6
NOTE
mm (0.30 in).
Fans are only installed to the MP75A4(R) and MP75A5(R)
NOTE
.
Mentor MP Short Form Guide
Issue Number: 5
1
222mm (8.74in)
444mm
(17.48in)
1
222mm
(8.74in)
www.controltechniques.com
170mm (6.69in)
6.5mm (0.26in)
1
1
22mm
(0.87in)
40mm
(1.58in)
250mm (9.84in)
4 holes to
suit M6
380mm
(14.96in)
21