Emerson Quantum MP User Manual page 86

Safety Product Mechanical
Information Information Installation
Table 9-7 SMARTCARD status indications
Lower
display
boot
A parameter set is being transferred from the SMARTCARD to the
drive during power-up. For further information please refer to section
9.3.4 Booting up from the SMARTCARD on every power up (Pr 11.42
(SE09, 0.30) = boot (4)) on page 82.
cArd
The drive is writing a parameter set to the SMARTCARD during power-
up. For further information please refer to section 9.3.3 Auto saving
parameter changes on page 82.
86
Electrical Getting Basic Running the
Installation Started parameters
Description
SMARTCARD
Optimization
Motor Operation
www.emersonct.com
Onboard Advanced Technical
Diagnostics
PLC Parameters Data
Quantum MP User Guide
UL
Information
Issue: A4