Enclosure - Emerson Quantum MP User Manual

Safety Product Mechanical
Information Information Installation
3.5

Enclosure

3.5.1 Enclosure layout
Please observe the clearances in the diagram below taking into account any appropriate notes for other devices / auxiliary equipment when planning
the installation.
Figure 3-8 Enclosure layout Size 1
Ensure minimum clearances
are maintained for the drive.
Forced or convection air-flow
must not be restricted by any
object or cabling
Signal cables
Plan for all signal cables
to be routed at least
300mm (12in) from the
drive and any power cable
20
Electrical Getting Basic
Installation Started parameters
Enclosure
≥100mm
(4in)
External
controller
Armature
connection
cable
connection cable
Running the SMARTCARD
Optimization
Motor Operation
AC supply, contactor,
line chokes
≥100mm
(4in)
≥100mm
(4in)
≥100mm
(4in)
Field
www.emersonct.com
Onboard Advanced Technical
Diagnostics
PLC Parameters Data
Note
For EMC compliance:
1) Power cabling must be at
least 100mm (4in) from the
drive in all directions
2) Ensure direct metal contact
at drive and filter mounting
points (any paint must be
removed)
Quantum MP User Guide
UL
Information
Issue: A4