YASKAWA L1000H Quick Start Manual page 35

Par. Name
Flow at
100cSt & at
P1-11
max. pres-
Pump data:
sure
refer to the parameter data supplied
Flow at with the valve package or use the
100cSt & at following web page to calculate the
P1-12
max. pres- values:
sure http://www.blain.de/calc
Pump Rated
P1-13
Speed
Flow at
Pump data
empty car
P1-14
For valves from manufacturer
pressure &
"Blain Hydraulics GmbH", use cal-
at 100cSt
culation tool in the internet:
Flow at 1
http://www.blain.de/calc
bar pres-
or the iPhone App "Blain Calcula-
P1-15
sure & at
tor"
100cSt
Nominal
P1-16 Elevator data
Speed
Intermedi-
P1-17 Elevator data
ate Speed
Inspection
P1-18 Elevator data
Speed
Leveling
P1-19 Elevator data
Speed
Down Travel Control
Down Con-
trol Initial-
P2-01 ization
Enables down travel control
Tempera-
ture
Determines the minimum pump
Down frequency during down travel con-
P2-03 Energy Fac-
trol. Modes:
tor P2-03 = 0.0 Energy Saving
P2-03 > 0.0 Normal
Down Time for calculated acceleration
P2-04 Ramp Time ramp 1 during down travel control
1 sequence.
Down Time for calculated acceleration
P2-06 Ramp Time ramp 2 during down travel control
2 sequence.
YASKAWA Europe TOEP C710606 91B AC Drive L1000H - Quick Start Guide
Description Par. Name
Down
Decelera- Factor for adjusting the decelera-
P2-07 tion Fre- tion frequency level in down travel
quency control.
Gain
Down
Speed Torque reference value for Down
P2-08
Torque Ref- Travel Control
erence
Down
Torque
Gain value, applied to the torque
P2-09 Gain Cor-
gain in case of down travel control.
rection Fac-
tor
Down Tem-
perature Gain value, applied to the tempera-
P2-10 Gain Cor- ture gain in case of down travel
rection Fac- control.
tor
Down
Decelera- Gain value, applied to the pump
P2-11
tion Leak- leakage at deceleration.
age Gain
Down Lev-
eling Con- Wait time for leveling travel con-
P2-12
trol Wait trol.
Time
Down Lev-
eling Con- Step frequency for leveling travel
P2-13
trol Step control.
Frequency
Down level-
Step time for leveling travel con-
P2-14 ing control
trol.
step time
S Curve
Characteris- S curve characteristic 2 at decelera-
P2-15
tic 2 at tion start.
Decel Start
S Curve
Characteris- S curve characteristic 2 at decelera-
P2-16
tic 2 at tion end.
Decel End
S Curve
Characteris- S curve characteristic 3 at decelera-
P2-17
tic 3 at tion start.
Decel Start
6 Parameter Table
Description
EN 35