Part Names And Function; Exterior - Sharp MX-3050N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
BEFORE USING THE MACHINE

PART NAMES AND FUNCTION

EXTERIOR

(3)
MX-3050N/MX-3060N/MX-3550N/
MX-3560N/MX-4050N/MX-4060N
(1) Output tray (exit tray cabinet)
Received faxes and printed papers are delivered to this
tray.
(2) Job separator tray (upper tray)
Output is delivered to this tray.
(3) Automatic document feeder
It automatically feeds and scans multiple originals. 2-sided
originals can be automatically scanned. For the
MX-3070N/MX-3570N/MX-4070N, both sides of 2-sided
originals can be automatically scanned at one time.
► AUTOMATIC DOCUMENT FEEDER (page 1-77)
(4) USB port (A type)
This is used to connect a USB device such as a USB
memory device to the machine.
Supports USB 2.0 (Hi-Speed).
*1 Peripheral device.
Equipped standard or not available in some countries and regions. Not available on some models. Contact your
dealer or nearest authorised service representative.
(1) (2) (3)
*1
*1
1-3
(4) (5) (6)
(5) Operation panel
This panel hosts the [Power] button, [Power Save]
button/indicator, error indicator, [Home Screen] button,
main power button, data notification indicator and touch
panel.
Use the touch panel to operate each of these functions.
► OPERATION PANEL (page 1-8)
(6) Exit tray unit (right tray)
Set this tray as the output tray if needed.
*1
(7) Keyboard
Use this as a substitute for the soft keyboard displayed
on the touch panel. When not being used, it can be
stored under the operation panel.
*1
(8) Inner finisher
This staples paper. A punch module can also be installed
to punch holes in output paper. You can also perform
stapling manually.
► INNER FINISHER (page 1-106)
(7) (8)
*1