Table of Contents
Advertisement
Chapter 3-Basic Operation
Personal Conference Manager (PCM)
Guidelines
3-86
The Personal Conference Manager (PCM) interface enables the conference
chairperson to control various conference features using his/her
endpoint's remote control device.
The following conference operations can be performed:
•
Initiate Polycom's Click&View™ application to change the local
screen layout.
•
Invite a participant to connect to the conference.
•
View and control the audio and video of each connected endpoint.
•
Camera Control - control the camera of a remote endpoint using
(FECC).
•
Control the camera of a connected endpoint.
•
Video Force a specific participant to a specific window of the video
layout.
•
Initiate and control recording of the conference.
•
Disconnect a participant.
•
Terminate the conference.
•
PCM is only supported with MPM+ cards.
•
PCM is only available in CP conferences.
•
Although the RMX can host up to a maximum of 800 conferences
(depending on the RMX model) PCM can only be activated from 4
conferences per MPM+ card.
— An RMX 2000 with 2 MPM+80 cards installed can host a total of
8 PCM sessions while an RMX 4000 with 4 MPM+80 cards
installed can host a total of 16 PCM sessions.
— If 4 PCM sessions are active on an MPM+ card and a chairperson
of another conference, hosted on the same MPM+ card, attempts
to start an additional PCM session, a message indicating
insufficient resources is displayed and FECC is activated.
•
When PCM is active, FECC can only be performed by the chairperson
using PCM's Camera Control menu.
Advertisement
Table of Contents
