Polycom DOC2560C Getting Started Manual page 67

The Phones dialog box opens.
23 Click Add to define dial-in number ranges.
The Add Phone Number dialog box opens.
24 Define the following parameters:
Table 2-13 Fast Configuration Wizard – Add Phone Numbers
Field
First Number
Last Number
• A range must include at least two dial-in numbers.
•
A range cannot exceed 1000 numbers.
25 Click OK.
The new range is added to the Dial-in Phone Numbers table.
26 Optional. Repeat steps 23 to 24 to define additional dial-in ranges.
27 In the Phones tab enter the MCU CLI (Calling Line Identification).
Polycom RMX 1500/2000/4000 Getting Started Guide
Description
The first number in the phone number range.
The last number in the phone number range.
2-35