Table of Contents
Advertisement
Chapter 2-First Time Installation and Configuration
User Definition
Selecting the RMX Web Client Languages
2-40
On first entry, the default Username and Password are both POLYCOM.
In the RMX Web Client's Main Screen an MCU State indicator displays
a progress indicator
until the system start-up is complete.
39 Create a new User with Administrator permissions and delete the
default User (POLYCOM).
For system security reasons the system is not fully configured until
this step has been performed.
For more information see the RMX 1500/2000/4000 Administrator's
Guide, "Users, Connections and Notes" on page 12-1.
40 The system is now fully configured and if there are no System Errors,
the green RDY LED on the CNTL module (on the RMX's front panel)
turns ON.
The Fast Configuration Wizard configures the Default IP Network Service with
common parameters. Specific or additional settings (e.g. for ICE, or Secured
Mode) should be performed once the initial configuration is complete. For
detailed description of the IP Network Services, see the RMX 1500/2000/4000
Administrator's Guide.
The RMX is shipped with a default Administrator user called POLYCOM.
Once you have defined other authorized administrator users, it is
recommended to remove the default user to prevent unauthorized users
from logging into the system.
For more information, see the RMX 1500/2000/4000 Administrator's Guide
"Deleting a User" on page 12-4.
By default, the RMX Web Client interface is displayed only in English.
However, the system administrator can choose the languages available
for selection on the Login screen. These languages are represented by
flags.
To choose the languages for selection in the Login screen:
1
On the RMX menu, click Setup > Multilingual Setting.
showing the time remaining
Advertisement
Table of Contents
