Chapter 2-First Time Installation and Configuration
Installing the RMX 2000
2-12
For detailed instructions, precautions and requirements for installing the RMX
2000 refer to the Polycom RMX 2000 Hardware Guide.
•
The following procedures have to be performed to install the RMX
2000 in your site:
•
Installing the RMX in a rack or as a standalone
•
Connecting the RMX 2000 to the power source
•
Connecting the network (LAN, IP and ISDN) cables to the RMX
Mounting the RMX 2000 in a Rack
There are two methods for installing the RMX in a 19" rack:
•
Using rack brackets on the RMX 2000
— Install rack brackets, supplied by the rack manufacturer, in the
rack.
— Mount the RMX 2000 on top of the rack brackets.
— Fasten the RMX to the rack with screws through the four holes in
the RMX's front mounting brackets.