Polycom DOC2560C Getting Started Manual page 64

Chapter 2-First Time Installation and Configuration
2-32
The PRI Settings dialog box opens.
19 Define the following parameters:
Table 2-11 Fast Configuration Wizard – PRI Settings
Field
Default Num Type
Description
Select the Default Num Type from the list.
The Num Type defines how the system handles the
dialing digits. For example, if you type eight dialing
digits, the Num Type defines whether this number is
national or international.
If the PRI lines are connected to the RMX via a
network switch, the selection of the Num Type is
used to route the call to a specific PRI line. If you
want the network to interpret the dialing digits for
routing the call, select Unknown.
Default: Unknown
Note: For E1 spans, this parameter is set by the
system.