Table of Contents
Advertisement
Chapter 2 -
Web User Interface (UI)
Item
Disable H.323
Playback
Enable AES
Enable H.264 Content
Clicking on the "View Security Updates Already Installed on this Device" link
on the bottom of the page will look up a table of system updates already
installed on the Polycom® RSS™ 4000 device, as shown in below figure.
Clicking the "Back" button on this page will return the user to the previous
System Settings page.
Figure 2-19
When synchronizing the device's system time with an NTP server, the user must set
an active NTP server address. Since the communication between the device and the
NTP server requires a certain time, the system time may not be instantly updated.
Logger Settings
Polycom® RSS™ 4000 offers a background log backup function. The log files
are used to troubleshoot the system by the Polycom Certified support
experts.
Clicking on "System Configuration -> Logger Settings" allows the user to
configure the Polycom® RSS™ 4000 system log information, the log models
generated, and the size of the log files. In general it's recommend not to
modify the default setting of this section, unless instructed by the Polycom
certified support expert.
2-16
Details
This item is not checked by default. If selected, it will
disable the H.323 connection's playback function and "Play
Video" will be disabled in the Onscreen UI main menu.
This setting does not affect playback from Web site.
If this function is enabled, the system will automatically
encrypt H.323 calls with other endpoints or MCUs with
AES encryption, if the endpoint or MCU supports AES.
Note: AES encryption is an optional function of the
Polycom® RSS™ 4000 and will not be available until a
license is purchased and activated. To obtain this function,
please contact your supplier.
This option is enabled by default.
When checked, the Polycom® RSS™ 4000 will support
H.264 content sending from endpoint.
Security Updates Table
Advertisement
Table of Contents
