Receiving Multicast Videos - Polycom 3150-30828-001 User Manual

shown below.
Figure 6-1

Receiving Multicast Videos

Click on the "Settings" button in the multicast operating window to change
the Polycom RSS Multicast Player 's settings, as shown below.
Figure 6-2
The user must set the following two options in this interface:


Click on the "OK" button after completing settings. The Polycom RSS
Multicast Player will now begin receiving videos from the specified multicast
channels within 45 seconds. A list of received multicast videos will be shown
in the multicast operating window, as shown below.
Multicast Player
Setting
Session Advertisement Address: Configure the IP address for receiving
the multicast file list. This address must be the same as the Polycom®
RSS™ 4000's session announcement address.
Session Advertisement Port: Configure the port number for receiving the
multicast file list. This port number must be the same as the Polycom®
RSS™ 4000's "session announcement port."
Polycom® RSS™ 4000 User Guide
6-3