Table of Contents
Advertisement
viewed at the same time.
If PC Content recording is selected, but no PC content was sent during the recording,
two windows or one two-image window will be displayed during playback on the Web
but the primary window for content will remain black. Therefore, users should only
check "Record my PC Content" when they are sharing H.239 content. Otherwise, the
user should select "No" for this option.
PIN Code Setting
In the Record Video menu, the user can select Set PIN code for this
recording. The system will enter the PIN code setting menu.
Figure 3-3
PIN Code Setting
An IVR message will alert the user to input the PIN code followed by "#" to
exit. To set the PIN code, use the remote control to enter a number no more
than eight digits in length. Pressing "#" to exit is not necessary if a user enters
an eight-digit PIN code. The digits of the PIN code will be visible on the
menu page during the setting process. After the user press "#" to complete
the setting, the menu will automatically jump to the "Record Video" menu,
and a marker for the PIN code will appear after "Start Recording," as shown
in the figure below. If viewing a recording where a PIN has been set, viewers
will be asked to enter the correct PIN code before they can play back the
video.
Polycom® RSS™ 4000 User Guide
3-3
Advertisement
Table of Contents
