Table of Contents
Advertisement
Chapter 4 -
Onscreen User Interface (UI) – Archive Playback
Figure 4-4
Use the remote control's number keypad to input a file's quick access code,
and press "#" when finished.
If a PIN code has been set for a recording file, the system will prompt the
user to enter the PIN code after the quick access code has been input.
If no PIN code has been set, the system will immediately begin to play back
the file after the quick access code has been entered.
Quick play (with Polycom® RSS™ 4000 registered to a gatekeeper)
If an endpoint has viewing rights for a video, a user can use the remote
control's number keypad to input the Polycom® RSS™ 4000's E.164 alias +
the video's quick access code to immediately play the file without needing to
browse the menu. For example, if the RSS E.164 alias is 1234, and the desired
video file's quick code is 567890, the user could dial 1234567890 to view the
video without navigating through menus.
Quick play (with Polycom® RSS™ 4000 not registered to a gatekeeper)
Call the Polycom® RSS™ 4000's IP address and input the quick access code
in the endpoint's extension field (the endpoint must support the extension
number field) to view the video file without navigating through menus.
When playing back a video, press "*3" to stop playback.
Sorting Archives
The Polycom® RSS™ 4000 provides Archive List sorting functions in order to
help users find desired videos in the archives. Use the remote control to
select "Archive sort options" on the "Video Playback" menu, and confirm to
enter the archive sorting interface, as shown below.
4-4
Enter the quick access code
Advertisement
Table of Contents
