Designing General System Behaviors; Configuring General Setup - Polycom VS4000 Administrator's Manual

Administrator's Guide for ViewStation EX, ViewStation FX, and VS4000

Designing General System Behaviors

Configuring General Setup

4-16
You can configure the following general system behaviors to accommodate the
needs of your organization.
General Setup
Multipoint Calling
Call Answer Mode
Passwords and Security Options
Date, Time, and System Location
For information about...
Setting video network
usage preferences for
calls
Setting call speeds for
users
The General Setup screen provides access to high-level options for the entire
system. For convenience, some of the User Setup options are repeated on these
screens.
1. Go to System Info > Admin Setup > General Setup.
2. Configure these settings:
Setting Description
Language Sets the language for the user interface.
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
System Name Enter or change the system name in this field. This name appears
on the screen for the far site when you are making calls.
Auto-Answer Point Specifies whether to answer incoming point-to-point calls
to Point automatically.
Auto-Answer Specifies whether to accept incoming multipoint calls
Multipoint automatically.
See...
Configuring Video Call Preferences on page
Configuring Dialing Speeds on page
www.polycom.com/videodocumentation
3-4.
3-10.