Polycom VS4000 Administrator's Manual page 65

© Polycom, Inc.
To configure the PRI channels:
1. Go to System Info > Admin Setup > Video Network > IMUX > PRI Network
> PRI Status.
2. Select a channel to activate or deactivate it. Active channels are represented by
a green icon, and inactive channels are represented by a gray icon.
Channels should be activated and deactivated only by a knowledgeable network
professional.
To access PRI Information:
1. Go to System Info > Admin Setup > Video Network > IMUX> PRI Network
> PRI Information.
2. You can view the following read-only information:
Setting
PRI Line Type
Number of Active Channels
D Channel Location
Network Mode
Clock Source
Terminal Endpoint ID (TEI)
Line Termination (PRI E1 only)
Chapter 3 - Configuring Network Use
Description
Displays read-only information about the system and
its configuration.
3-17