VERITAS Velocity 7330 Hardware Installation Manual page 28

3
Identify the front, taller end of each rail.
Rear
Front,
Left
Note the ledge that is perpendicular to the main part of the rail. The storage
shelf sits on this ledge.
4
Locate the spacers and place them near the rail screws.
Note: Two types of spacers may ship with the storage shelves. Some spacers
are round, while other spacers are square. Both types of spacers are galvanized
steel. Both types of spacers have the same usage and functionality.
5
To align the rail with the front and the rear RUs, do the following:
Locate the RUs on the front and the rear of the rack that you plan to use.
■
Front,
Right
Installation procedures
Installing the Primary Storage Shelf
28