Determining The Rack Location - VERITAS Velocity 7330 Hardware Installation Manual

Determining the rack location

Velocity 7330 appliance container contents
Table 2-2
Container Contents
Compute node
■
■
■
■
■
■
■
Primary Storage
■
Shelf
■
■
■
■
■
■
The height of the Veritas Velocity 7330 Appliance compute node and storage shelf
each require a different number of rack unit (RU) spaces. The compute node requires
2 RU and the storage shelf requires 4 RU. To help you identify RU spacing, many
rack manufacturers typically use a system of lines and sequential numbers starting
at the bottom of the rack. The front and the rear of the rack are marked the same
to ensure that the rails are installed straight and level. One RU has three holes.
The holes for one RU are typically marked with a line below the bottom hole and
another line above the top hole.
An example of rack RU space markings
Figure 2-1
Left and right rack rails
Compute node
Bezel
Two SAS cables
Two power cords
Screwdriver, cable straps
Envelope containing the following:
Warranty and license information
■
Left and right rack rails with mounting hardware
Bezel
Primary Storage Shelf
Four Fiber Channel cables
Four SFPs
Two SAS cables
Two power cords
Preinstallation requirements
Determining the rack location
23