Removing The Power Cable - VERITAS 5230 Hardware Service Procedure
Replacing the power cable
Hide thumbs
Also See for 5230:
- Hardware installation manual (140 pages) ,
- Configuration manual (78 pages) ,
- Hardware service procedure (8 pages)
Advertisement
Removing the power cable
Use the following procedure to remove the power cable.
To remove the power cable
1
If you want to remove the faulty power cable from the NetBackup Appliance, do the following:
Warning: Swap one power cable at a time only. If you need to remove both power cables, make
sure that the appliance is turned off before you proceed.
Pull the faulty power cable from the appliance power supply socket. The LED on the power supply
shows an amber light when the power cable is faulty or when there is no power cable.
HSP #175 Appliance and Storage Shelf Power Cable Replacement
4
Advertisement
