A blinking, amber LED indicates that a RAID rebuild is in progress.
■
The Activity LED (2) indicates the following:
The LED is not lit when the disk has spun down, although power is still
■
on.
The LED is solid green when there is no disk activity, although power
■
is still on.
The LED blinks green when the disk spins up.
■
The LED blinks green occasionally when commands are processed.
■
9
Proceed to configuring the IPMI port and enabling access to the Veritas Remote
Management Console.
See
"About the Veritas Remote Management Console on the Velocity physical
appliance"
on page 50.
Turning on the hardware and verifying operation
Installation procedures
49