Specifying The Mld Snooping Version; Setting The Maximum Number Of Mld Snooping Forwarding Entries - HP 6125XLG Configuration Manual

Step
2. Enable MLD snooping
globally and enter
MLD-snooping view.
3. Return to system view.
4. Enter VLAN view.
5. Enable MLD snooping for the
VLAN.

Specifying the MLD snooping version

Different versions of MLD snooping process different versions of MLD messages:
MLDv1 snooping processes MLDv1 messages, but it floods MLDv2 messages in the VLAN instead
•
of processing them.
MLDv2 snooping processes MLDv1 and MLDv2 messages.
•
If you change MLDv2 snooping to MLDv1 snooping, the system does the following:
Clears all MLD snooping forwarding entries that are dynamically created.
•
Keeps static MLDv2 snooping forwarding entries (*, G).
•
• Clears static MLDv2 snooping forwarding entries (S, G), which will be restored when MLD
snooping is switched back to MLDv2 snooping.
For more information about static MLD snooping forwarding entries, see
To specify the MLD snooping version:
Step
1. Enter system view.
2. Enter VLAN view.
3. Specify the version of MLD
snooping.
Setting the maximum number of MLD snooping forwarding
entries
You can modify the maximum number of MLD snooping forwarding entries. When the number of
forwarding entries on the device reaches the upper limit, the device does not automatically remove any
existing entries or create new entries until some entries time out or are removed. In this case, HP
recommends that you manually remove excessive entries.
To set the maximum number of MLD snooping forwarding entries:
Step
1. Enter system view.
2. Enter MLD-snooping view.
Command
mld-snooping
quit
vlan vlan-id
mld-snooping enable
Command
system-view
vlan vlan-id
mld-snooping version
version-number
Command
system-view
mld-snooping
104
Remarks
By default, MLD snooping is
disabled.
N/A
N/A
By default, MLD snooping for a
VLAN is disabled.
"Configuring static
Remarks
N/A
N/A
The default setting is MLDv1
snooping.
Remarks
N/A
N/A
ports."