Polycom SpectraLink 8020 Administration Manual page 70

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
Message
System Locked
(with Busy Tone)
TFTP ERROR(x):yy
Too many errors
Unknown
xx:yy:zz
Updating ...
Updating Code
Wrong Code Type
Waiting
70
Description
Gateway is locked.
A failure has occurred during a TFTP
software download. (x) = The file number
which was being downloaded; yy is an
error code describing the particular
failure. Possible error codes are:
01 = TFTP server did not find the
requested file.
02 = Access violation (reported from
TFTP server).
07 = TFTP server reported "No such
user" error.
81 = File put into memory did not CRC.
FF = Timeout error. TFTP server did not
respond within a specified period of time.
The handset continues to reset and
cannot be recovered.
A phrase is missing from the phintl file.
The handset is internally updating its
software images
Handset is downloading new software
into memory. The number icons at the
bottom of the display indicate which file
number is currently being downloaded.
This message also displays a progress
bar. When the progress bar fills the
display line the update operation is
complete on that file.
The software loaded into the handset is
the wrong type for this model handset.
Handset has attempted some operation
several times and failed and is now
waiting for a period of time before
attempting that operation again.
Action
Try the call again, the system has
been locked for maintenance.
Error code 01, 02 or 07 - check the
TFTP server configuration.
Error code 81, the handset will
attempt to download the file again.
For other messages, power off the
handset, then turn it on again to retry
the download. If the error repeats,
note it and contact Polycom
technical support.
Fatal error. Return handset to
Polycom.
Download new software from the
SpectraLink site per Chapter 7
Software Maintenance.
None. The handset may do this
briefly after a download. This is
informational only.
None. When the progress bar fills
the display line the update operation
is complete on that file.
Do not turn the handset off during
this operation.
Verify the license type is set
correctly.
If the license type is correct, replace
the software image on the TFTP
server with the software that is
correct for the handset model.
None. The handset is waiting for a
specified period of time before
attempting that operation again.
1725-36030-001_B.doc