Toggle Options; Data Entry And Editing - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
20
If an admin password has been set, the display will require its
entry before opening the Admin menu. The default password is
123456. If no password is set, the display will proceed directly
into the Admin menu.
Navigation
The navigation keys just below the softkeys are used to navigate
through and select menu options. These are referred to as
▼, ◄, ►, and
Nav Nav Nav

Toggle options

Some menu options that have only two possibilities operate on a
toggle basis. The current setting is shown on the second row of the
display, called the info line. Press
settings. For example, when
will show on the info line. If you select
show on the info line and the menu option will toggle to

Data entry and editing

An asterisk (*) next to an option on the display indicates that it is
selected. Use the Nav keys and the softkeys to navigate and select
desired options.
Enter numbers by pressing the buttons on the keypad. The blinking
underscore identifies the current cursor position. When entering
alphanumeric strings, the
pressed to toggle the case. Enter letters by repeatedly pressing the
corresponding key until the desired letter displays on the screen. Use
the softkey to change the case as needed.
CAPS
To edit during entry, delete the character to the left of the cursor by
pressing the softkey. To replace an entry, delete it by pressing the
Del
.
NavOK
to toggle between the
NavOK
is the menu option,
Enable PTT
Enable PTT
/ softkey will appear and may be
CAPS caps
▲,
Nav
PTT Disabled
, will
PTT Enabled
.
Disable PTT
1725-36030-001_B.doc