Polycom SpectraLink 8020 Administration Manual page 58

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SRP
58
good channel allocation (at any point, the strongest AP shown
should be on a different channel than the next best choice).
3. Finally, use the single AP (
to ensure it is configured for the proper data rates, beacon
interval, 802.11 options enabled, QoS method and security
method.
Make any necessary adjustments to AP locations and configurations
and repeat steps 1 through 3 until the site survey shows adequate
coverage and correct configuration at every location.
The installation is not complete until these certification steps have
been performed. Do not hand out wireless telephones at a site that has
not been certified.
) and display to check each AP
MyID Detl
1725-36030-001_B.doc