Related Manuals for Polycom INTERMEC 2100
Summary of Contents for Polycom INTERMEC 2100
-
Page 1: Configuration Guide
Field Verified Configuration Guide Intermec MobileLAN Access Points 2100, 2101, 2102, WA21, WA22 January 2008 Edition 1725-36053-001 Version G... -
Page 2: Copyright Notice
Polycom for any purpose, or give rise to any liability of Polycom whatsoever. Contact Information Please contact your Polycom Authorized Reseller for assistance. -
Page 3: Product Summary
Refer to Polycom WLAN Compatibility Table for Field Verified AP software versions. * Telephone calls per AP must be configured in the system per documentation provided by Polycom. WEP and Automatic Learn are programmed into each handset in addition to being configured in the AP. - Page 4 Field Verified Access Point Capacity and Positioning Each site is unique in its AP requirements. Please take the following points into account when determining how many APs are needed and where they should be placed in the facility. Handset range There must be wireless LAN coverage wherever SpectraLink 8000 Wireless Telephones will be used.
-
Page 5: Notes On Configuration
monitored/analyzed using a network sniffer or a simple network management protocol (SNMP) workstation. Number of other wireless devices per AP The SpectraLink 8000 Wireless Telephones share bandwidth with other wireless devices. To ensure adequate RF bandwidth availability, consider the number of wireless data devices in use per AP. Notes on Configuration The AP must support SpectraLink Voice Priority (SVP). -
Page 6: Access Point Configuration
Field Verified Access Point Configuration The following AP configuration steps need to be repeated for each AP radio that you are planning to use with VoIP. 1. Connect to the AP using the Web browser interface. Consult the access point documentation for details. 2.
Need help?
Do you have a question about the INTERMEC 2100 and is the answer not in the manual?
Questions and answers