Reusing White Ink - Brother GTX-4 Instruction Manual

7-3-2. Reusing White Ink

Perform the following operations when you restart printing with the white ink after activating the white ink pause mode.
(1) From the menu, select [Maintenance] > [White Ink Pause Mode] > [Disable].
(2) Check the waste ink tank level and take a necessary measure for it, if any, then press
(3) Remove the maintenance solution cartridge from the printer.
<TIPS>

The bottom of the cartridge may be soiled with ink.
(4) Open the cartridge's lid.
<IMPORTANT>

When opening the lid, be sure not to touch portion (a). Otherwise, it could be damaged.

Place the entire cartridge on a flat surface, push the latches on the bottom surface of the cartridge downward and open the
lid.
Cartridge
(a)
Precautions to keep good printing quality/use printer over the long term
Maintenance solution cartridge
Lid
210
.
W12 W34
Latch
X0039
Lid
X0042