Brother GTX-4 Instruction Manual page 237

The power cannot be turned on
Probable Cause
Is the power cord connected to the printer?
Is the front cover closed firmly?
An error occurs immediately after activating the printer
Probable Cause
Is any error message displayed?
No print data can be loaded from USB flash memory
Probable Cause
Has the USB flash memory been inserted into its
insertion slot properly?
Is the applicable file ARP or AR3 file?
Is your USB flash memory suited to required
conditions?
Has your USB flash memory been broken?
Neither uni-directional printing nor bi-directional printing can be performed
Probable Cause
Do the settings of printer driver and printer agree
with each other?
An empty state of an ink pouch cannot be detected
Probable Cause
Is an ink pouch in its correct position?
After stirring the white ink, is the lid of the ink
cartridge opened and the pouch placed in the
correct position?
Make sure that the power cord is connected to the printer.
Close the front cover properly.
With reference to "9-3. Error message >>P.288", check the
content of the error, and restart the printer. If the error is still not
eliminated, please contact your dealer or Brother.
Insert the USB flash memory into the insertion slot firmly.
This printer cannot print out the print data of
GT-541/GT-782/GT-3. Recreate the print data.
Please use a FAT32-formatted USB flash memory of which
storage capacity ranges from 2 GB to 32 GB. You cannot use a
USB memory with security functions such as password lock
function.
Check to see if it functions properly using your PC or the like.
Note that the setting of the printer's setting has priority over the
setting of printer driver. The printer driver's setup value takes
effect only if the printer's setting is [Auto].
For the printer configuration details, please refer to "8-1. Setting
the print direction >>P.224".
If the ink pouch is in contact with the side of the ink cartridge case,
detection may not be performed correctly.
With reference to "7-1-1. Replacement of ink pouch with a new
one >>P.173", set the ink pouch once again correctly.
Open the lid of the white ink cartridge and appropriately rewind
the ink pouch. Ink might have entered into the wound section of
the pouch when stirred, which could have caused improper
winding of the pouch. Refer to "6-2-3. Daily agitation of the white
ink >>P.127".
237
Troubleshooting
Remedy
Remedy
Remedy
Remedy
Remedy