Confirmation And Replenishment Of Cleaning Solution - Brother GTX-4 Instruction Manual

6-2-2. Confirmation and replenishment of cleaning solution

Check to see if the amount of cleaning solution is kept at a proper liquid level in the cleaning liquid tank, and refill the
tank with the solution when its amount is below the proper level.
<TIPS>

Also, refill the tank with the solution when a warning message appears on the operation panel screen or in the warning message
window when the cleaning liquid tank is not pulled out.
(1) Pull out the cleaning liquid tank from the side of the printer.
(2) Open its lid and refill it with the cleaning solution up to the "FULL" line.
<IMPORTANT>

Be sure not to put the cleaning solution into the tank above the "FULL" line.
Cleaning solution
(3) Close the lid and slowly place the cleaning liquid tank into the printer.
FULL
LOW
Cleaning liquid tank
126
Basic printing procedures
X0044