Daily Agitation Of The White Ink - Brother GTX-4 Instruction Manual

Hide thumbs Also See for GTX-4:
Table of Contents

Advertisement

6-2-3. Daily agitation of the white ink

Perform the procedures shown below if a white ink cartridge stirring message is displayed before starting operation.
(1)
Take out the white ink cartridge from the printer.
<TIPS>
The bottom of the cartridge may be soiled with ink.
(2)
Shake the cartridge 100 times side by side to stir the white ink.
<IMPORTANT>
The white ink cartridge should be held horizontally when shaking it.
Holding the white ink cartridge upside down or shaking it too roughly could break the ink pouch.
<NOTE>
Wear the provided gloves when performing this task.
When the remaining ink level becomes approximately 5.9 in. (15 cm), shake the cartridge with its cover open and with the
edge of the ink pouch slightly winded, to make the ink easier to stir.
White Ink Cartridge
Shake 100 times (for approx. 50 seconds)
(Swing distance should be approx. 2 in. (5 cm).
Increase the swing distance when the
remaining ink level becomes low.)
White Ink Cartridge
Ink pouch
127
Basic printing procedures
W12
W34
Edge of the rib
Remaining ink volume should
be approx. 5.9 in. (15 cm)
X0039
X0040

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents