4-3-3. When connecting via LAN: Printer static IP address setting
There are two ways to set a static IP address for the printer; the setting procedures from the Start menu on the PC side,
and other setting procedures from menu manipulation on the printer side. When you set this through menu manipulation
on the printer side, refer to "8-13. Static IP address setting >>P.230".
When connecting via LAN, Printer static IP address needs to be obtained beforehand.
In addition, if the PC cannot recognize the Printer even after performing "4-3-4. When connecting via LAN: Adding a printer to PC
>>P.50", correct static IP address might not be assigned. Consult your administrator.
With the printer powered on, make a connection with a USB 2.0 cable between the printer and your PC.
For this connection of the USB cable, secure it in place by means of the cable clamp as required.
From [All Programs] in the Start menu, select the "GTX-4 Maintenance" from "Brother GTX-4 Tools".
After the window shown below appears, select the [IP Address Set] and click [Next].
Installation and preparation