Brother GTX-4 Instruction Manual page 292

Error code Error message
[White 34 Check The
2085
Cartridge]
2090 [Ink Pouch Error Black]
[Ink Pouch Error
2091
Magenta]
2092 [Ink Pouch Error Cyan]
2093 [Ink Pouch Error Yellow]
[Ink Pouch Error White
2094
12]
[Ink Pouch Error White
2095
34]
[USB flash drive Not
2100
Ready]
2101 [Not Enough Area]
2105 [No Files]
[Receiving History W/O
2110
Error1]
[Print Data Auto Delete
2120
Enable]
[White Ink Pause Mode...
2130
Non-performable]
Description
The white 34 ink pouch may
not be winded properly.
An error has been detected in
the black ink pouch.
An error has been detected in
the magenta ink pouch.
An error has been detected in
the cyan ink pouch.
An error has been detected in
the yellow ink pouch.
An error has been detected in
the white 12 ink pouch.
An error has been detected in
the white 34 ink pouch.
No USB flash memory been
inserted into its insertion slot.
At the writing stage to the
USB flash memory there is
not enough free space to
store the data.
No valid file exists in a USB
flash memory.
After the power is turned on, it
is found that there is no print
data received.
Because the Print Data Auto
Delete Enable function
remains active, no receiving
history is available.
Because the White Ink Pause
Mode remains active, no
white ink can be installed.
292
Remedy
Take out the white 34 cartridge, open the cover,
and have the ink pouch winded properly. Close the
cover, set the ink pouch back to the printer, and
press to clear the error.
In that case, replace with a new ink pouch set.
In that case, replace with a new ink pouch set.
In that case, replace with a new ink pouch set.
In that case, replace with a new ink pouch set.
In that case, replace with a new ink pouch set.
In that case, replace with a new ink pouch set.
Insert a USB flash memory into the slot, wait for a
couple of seconds, and perform the operation.
Insert a USB flash memory into the slot again.
If the problem still persists, check on the format
and type of the USB flash memory.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Use your PC to check free space on the USB flash
memory.
Insert the USB flash memory that has enough free
space into the insertion slot.
Connect the USB flash memory to your PC for
checking the information stored in it.
If the ARX4 file has been saved to it, check its
content by means of the file viewer.
For details, refer to "9-1. Troubleshooting
instructions >>P.236".
Press to clear the error.
Press to clear the error.
When you use the receiving history, disable the
Auto Job Delete option.
Press to clear the error.
When you use the white ink, do not make the
White Ink Pause Mode active.
Troubleshooting