Download  Print this page


Cleaning the nozzle guard
Put a proper amount of cleaning solution into the cleaning cup.
Moisten a new clean stick R with the cleaning solution.
Use a new clean stick R when you start cleaning.
Never touch the tip end of clean stick R with your hand. If any sebaceous matter is attached to the wiper, it may result in a
printer malfunction.
Do not use other fluids (water, etc.), because they may damage the print heads.
Do not return the cleaning solution which has been put in the cleaning cup to the cleaning solution bottle.
For a proper work operation, be sure to wear the printer-provided gloves.
Cleaning solution
Wipe clean the sides of the nozzle guard with the clean stick R.
Be sure not to touch the nozzle surface as well as the level surface and sidling surface of the nozzle guard.
Manually move the carriage to such a position that you can perform the cleaning with ease.
Nozzle guard
Precautions to keep good printing quality/use printer over the long term
Cleaning cup
Nozzle guard
Nozzle surface
Clean stick R
Cleaning cup
Clean stick R



Table of Contents

   Also See for Brother GTX-4

   Related Manuals for Brother GTX-4

Comments to this Manuals

Symbols: 0
Latest comments: