Editing Text - Brother GTX-4 Instruction Manual

5-2-5. Editing text

When you select an already placed text object, the text properties appear.
Changing any item inside the properties enables you to edit the text object.
3
9
11
13 14
No. Name
1 Input Text
2 Font
3 Boldface
4 Font Size
1
2
4
5
6
7
8
10
12
17
15 16
With this function, you can change content of the text.
With this function, enter your desired text within 20 characters, and reflect the
entry in the applicable text object by pressing the Enter key or the Accept
button.
Using this function, you can change a font type.
Those fonts that have been installed on the PC will appear in the drop-down
listbox.
<TIPS>

Only fonts that are confirmed to be normally usable are displayed. Therefore, some
fonts may not appear in the drop-down listbox even when they are installed on the
PC.
This function makes the specified font boldface.
Using this function, you can change a font size.
When you drag one of the four corners of a text object to zoom it in/out, or
when you change the font width or the font height, the corresponding value
changes accordingly.
The maximum value is 1,300 pt, and the minimum value is 10pt.
18
Function
63
Creating print data