Error Message - Brother GTX-4 Instruction Manual

9-3. Error message

What is shown below is the error message list of the GTX-4 printer. Any error message is displayed on the liquid crystal
panel.
Please try to solve any error according to the resolution strategy.
Error code Error message
[Cleaning Solution Low -
1000
Add More]
[Cleaning Solution Out -
1001
Add More]
[Color Head Getting
1030
Warm]
1031 [W Head Temp Rising]
1060 [Temp Low]
1061 [Temp High]
1064 [Humidity too Low]
1065 [Humidity too High]
1070 [Battery To Be Replaced]
1080 [RTC Not Adjusted]
1085 [RTC Not Adjusted]
1090 [Cap/Wiper Cleaning]
1091 [Cap/Wiper Cleaning]
Description
The remaining cleaning
solution is running low.
The cleaning solution has
been depleted.
It is the warning about
temperature increase in the
color heads.
It is the warning about
temperature increase in the
white heads.
The ambient temperature
decreases below the scope
covered by its warranty for the
best print result.
The ambient temperature
rises above the scope
covered by its warranty for the
best print result.
The humidity decreases
below the scope covered by
its warranty for the best print
result.
The humidity level is higher
than the scope covered by its
warranty for the best print
result.
Battery needs to be replaced.
The built-in clock has not
been set up.
The built-in clock has not
been set up.
Cap and wiper need to be
cleaned.
Cap and wiper need to be
cleaned.
288
Remedy
With reference to "6-2-2. Confirmation and
replenishment of cleaning solution >>P.126",
replenish the cleaning solution.
With reference to "6-2-2. Confirmation and
replenishment of cleaning solution >>P.126",
replenish the cleaning solution.
Please wait until the temperature decreases.
If the problem still persists, please contact your
dealer.
Please wait until the temperature decreases.
If the problem still persists, please contact your
dealer.
With reference to "10-1. Apparatus >>P.315",
increase the room temperature.
With reference to "10-1. Apparatus >>P.315",
decrease the room temperature.
With reference to "10-1. Apparatus >>P.315",
increase the room's humidity.
With reference to "10-1. Apparatus >>P.315",
decrease the room's humidity.
Make note of their error code and error message,
and please notify it to your dealer.
Make note of their error code and error message,
and please notify it to your dealer.
Make note of their error code and error message,
and please notify it to your dealer.
With reference to "7-1-2. Cleaning the nozzle
guard, wiper, exhaust cap, and suction cap
>>P.177", clean the cap and wiper.
With reference to "7-1-2. Cleaning the nozzle
guard, wiper, exhaust cap, and suction cap
>>P.177", clean the cap and wiper.
Troubleshooting