Download  Print this page

Advertisement

(6)
Take out the wiper cleaner from its packing bag, and remove it from its protector.
<IMPORTANT>
As soon as it is unpacked, do not leave it as it is and put it in position.
Protector
(7)
Insert a new wiper cleaner into the printer from above, tip it leftward and put it in place.
<TIPS>
First, insert the shaft from above. Then fold it to the left, press the area with the PUSH indication until a clicking sound is
heard, and get the latch into position.
Shaft
Wiper cleaner
(8)
Close the front cover.
(9)
Turn on the power.
<NOTE>
Dispose of any waste resulting from the replacement in accordance with applicable laws and ordinances.
<TIPS>
A head cleaning will be performed to prevent ink from drying up.
Precautions to keep good printing quality/use printer over the long term
Latch
Latch
Shaft
Wiper cleaner
188
X0128
X0056

Advertisement

Chapters

Table of Contents

   Also See for Brother GTX-4

   Related Manuals for Brother GTX-4

Comments to this Manuals

Symbols: 0
Latest comments: