Brother GTX-4 Instruction Manual page 293

Error code Error message
[Maintenance Pouch Set
2200
Black]
[Maintenance Pouch Set
2201
Magenta]
[Maintenance Pouch Set
2202
Cyan]
[Maintenance Pouch Set
2203
Yellow]
[Maintenance Pouch Set
2204
White12]
[Maintenance Pouch Set
2205
White34]
2214 [Ink Pouch Set White12]
2215 [Ink Pouch Set White34]
[PC Communication
3000
Error]
[PC Communication
3001
Error]
Description
Although an ink pouch is
needed, a maintenance
solution pouch is set to the
black cartridge.
Although an ink pouch is
needed, a maintenance
solution pouch is set to the
magenta cartridge.
Although an ink pouch is
needed, a maintenance
solution pouch is set to the
cyan cartridge.
Although an ink pouch is
needed, a maintenance
solution pouch is set to the
yellow cartridge.
Although an ink pouch is
needed, a maintenance
solution pouch is set to the
white 12 cartridge.
Although an ink pouch is
needed, a maintenance
solution pouch is set to the
white 34 cartridge.
Although a maintenance
solution pouch is needed, an
ink pouch is set to the white
12 cartridge.
Although a maintenance
solution pouch is needed, an
ink pouch is set to the white
34 cartridge.
Data reception from PC has
suspended.
Data transmission to PC has
suspended.
293
Remedy
Set an ink pouch to the black cartridge.
Set an ink pouch to the magenta cartridge.
Set an ink pouch to the cyan cartridge.
Set an ink pouch to the yellow cartridge.
Set the ink pouch to the white 12 cartridge.
Set the ink pouch to the white 34 cartridge.
Set the maintenance solution pouch to the white
12 cartridge.
Set the maintenance solution pouch to the white
34 cartridge.
Make sure that your PC is connected to the printer,
and resend the print data. If you have trouble in
sending the data, restart your PC and the printer.
This error will also occur "when the cable is
removed during data reception" or "when the
ongoing operation is canceled on the PC during
data reception".
Make sure that your PC is connected to the printer,
and start operating the PC tool over from the
beginning. If you have trouble in sending the data,
restart your PC and the printer.
This error may also occur "when the cable is
removed during data transmission" or "when the
PC tool is caused to stop running on the PC during
data transmission".
Troubleshooting