Brother GTX-4 Instruction Manual page 290

Error code Error message
[Nozzle Guard Cleaning
1701
Timing]
[Install Ink after Replacing
1801
Head]
[Perform Initial Ink
1901
Installation]
1905 [Exit Disable White Ink]
2000 [Cartridge Not Set Black]
[Cartridge Not Set
2001
Magenta]
2002 [Cartridge Not Set Cyan]
2003 [Cartridge Not Set Yellow] No yellow ink cartridge exists. Place the yellow ink cartridge in position.
[Cartridge Not Set
2004
White-12]
[Cartridge Not Set
2005
White-34]
2020 [No Ink Black]
2021 [No Ink Magenta]
2022 [No Ink Cyan]
2023 [No Ink Yellow]
2024 [No Ink White-12]
2025 [No Ink White-34]
2030 [Ink Pouch Error Black]
[Ink Pouch Error
2031
Magenta]
Description
The nozzle guard needs to be
cleaned.
Because the head
replacement is made, the
Install Ink after Replacing
Head function needs to be
put into execution.
The ink installation has not
been performed yet.
An operation to temporarily
stop the use of white ink is
stopped in the middle.
No black ink cartridge exists.
No magenta ink cartridge
exists.
No cyan ink cartridge exists.
No white 12 ink cartridge
exists.
No white 34 ink cartridge
exists.
The black ink pouch is empty. Replace the old black ink pouch with a new one.
The magenta ink pouch is
empty.
The cyan ink pouch is empty. Replace the old cyan ink pouch with a new one.
The yellow ink pouch is
empty.
The white 12 ink pouch is
empty.
The white 34 ink pouch is
empty.
The black ink pouch cannot
be identified properly.
The magenta ink pouch
cannot be identified properly.
290
Remedy
With reference to "7-1-2. Cleaning the nozzle
guard, wiper, exhaust cap, and suction cap
>>P.177", clean the nozzle guard.
With reference to "9-2-6. Replacement of print
head >>P.264", conduct the Install Ink after
Replacing Head.
With reference to "9-2-8. Re-install the ink
>>P.287", perform the initial ink installation
operation.
"7-3-1. Disabling white ink >>P.207" or "7-3-2.
Reusing White Ink >>P.210" should be performed
to its end.
Place the black ink cartridge in position.
Place the magenta ink cartridge in position.
Place the cyan ink cartridge in position.
Place the white ink cartridge in position.
Place the white ink cartridge in position.
Replace the old magenta ink pouch with a new
one.
Replace the old yellow ink pouch with a new one.
Replace the old white ink pouch with a new one.
Replace the old white ink pouch with a new one.
Put a proper ink pouch in its correct position.
Put an identifiable ink pouch in position inside the
printer.
If the problem still persists, please contact your
dealer.
Put a proper ink pouch in its correct position.
Put an identifiable ink pouch in position inside the
printer.
If the problem still persists, please contact your
dealer.
Troubleshooting