Table of Contents
Advertisement
Switch ON the power.
HELPFUL to know:
Put some powder on the film via the menu to have a little weight on the slack.
BEFORE REFILLING THE WHITE INK
4.2
In general the chemical composition of white ink includes pigments and other substances which are
not soluble. This insolubility might lead to sedimentation in white ink what has to be eleminated by
agitation before the refill process starts.
If the white ink is not agitated well before refilling, the print result will not be acceptable and the refill
container as well as the white ink in the printer will be lost. In addition, the removal of the unusable
white ink from the printer is time-consuming.
Before every refill of white ink you have to agitate the refill canister.
A
Tools that help to shake the white ink properly:
A: Fitness vibrating plate
B: Vibrational shaker
C: Gyroscopic mixer
B
C
Make sure that the edges of the film
have the same tension on both sides.
If not so, align the machines with each other!
Never join two films with tape or in any other way.
Press minus button and hold for 10 seconds.
Turn the canister upside down and check it with
a flashlight. If there is only foam, but no
sedimentation left, you can start the refill
process.
OK
13
/ 26
Advertisement
Table of Contents
