Configuring IP Multicast Routing
• Wireless Multicast
• PIM
• SSM
• Service Discovery Gateway
You can also review the following IP Multicast Optimization processes for your configuration:
• Optimizing PIM Sparse Mode in a Large IP Multicast Deployment
• Multicast Subsecond Convergence
• IP Multicast Load Splitting across Equal-Cost Paths
• SSM Channel Based Filtering for Multicast
• PIM Dense Mode State Refresh
• IGMP State Limit
Additional References
Related Documents
Related Topic
For complete syntax and usage information for the
commands used in this chapter.
For information on configuring the Multicast Source
Discovery Protocol (MSDP).
Error Message Decoder
Description
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
Standards and RFCs
Standard/RFC
RFC 1112
RFC 2236
OL-29890-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Document Title
IP Multicast Routing Command Reference (Catalyst
3650 Switches)
Routing Command Reference (Catalyst 3650
Switches)
Link
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
Title
Host Extensions for IP Multicasting
Internet Group Management Protocol, Version 2
Additional References
273