How To Configure Pim; Enabling Pim Stub Routing (Cli) - Cisco Catalyst 3650 Configuration Manual

How to Configure PIM

Feature
PIM router query message interval

How to Configure PIM

Enabling PIM Stub Routing (CLI)

This procedure is optional.
SUMMARY STEPS
1. enable
2. configure terminal
3. interface interface-id
4. ip pim passive
5. end
6. show ip pim interface
7. show ip igmp groups detail
8. show ip mroute
9. show running-config
10. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2 configure terminal
Example:
Device# configure terminal
Step 3
interface interface-id
Example:
Device(config)# interface
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
124
Default Setting
30 seconds.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters the global configuration mode.
Specifies the interface on which you want to enable PIM stub routing,
and enters interface configuration mode.
The specified interface must be one of the following:
Configuring PIM
OL-29890-01