Limiting How Long An Sdr Cache Entry Exists (Cli) - Cisco Catalyst 3650 Configuration Manual

Configuring sdr Listener Support
Command or Action
Step 6
show running-config
Example:
Device# show running-config
Step 7 copy running-config startup-config
Example:
Device# copy running-config
startup-config

Limiting How Long an sdr Cache Entry Exists (CLI)

By default, entries are never deleted from the sdr cache. You can limit how long the entry remains active so
that if a source stops advertising SAP information, old advertisements are not unnecessarily kept.
This procedure is optional.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip sap cache-timeout minutes
4. end
5. show running-config
6. show ip sap
7. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
264
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Configuring IP Multicast Routing
OL-29890-01