Configuring Msdp; Finding Feature Information; Prerequisites For Using Msdp To Interconnect Multiple Pim-Sm Domains; Ip Multicast Routing Configuration Guide, Cisco Ios Xe Release 3Se (Catalyst 3650 Switches - Cisco Catalyst 3650 Configuration Manual

Configuring MSDP

•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not
required.
Prerequisites for Using MSDP to Interconnect Multiple PIM-SM
Domains
Before you configure MSDP, the addresses of all MSDP peers must be known in Border Gateway Protocol
(BGP).
OL-29890-01
Finding Feature Information, page 169
Prerequisites for Using MSDP to Interconnect Multiple PIM-SM Domains, page 169
Information About Using MSDP to Interconnect Multiple PIM-SM Domains, page 170
How to Use MSDP to Interconnect Multiple PIM-SM Domains, page 184
Configuration Examples for Using MSDP to Interconnect Multiple PIM-SM Domains, page 209
Where to Go Next for MSDP, page 212
Additional References, page 213
Feature History and Information for Multicast Source Discovery Protocol, page 214

IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)

8
C H A P T E R
169