Where To Go Next For Wireless Multicast - Cisco Catalyst 3650 Configuration Manual

Configuring Wireless Multicast
Commands
show ip igmp snooping igmpv2-tracking
show ip igmp snooping querier vlan vlanid
show ip igmp snooping querier detail
show ipv6 mld snooping querier vlan vlanid
show ipv6 mld snooping wireless mgid

Where to Go Next for Wireless Multicast

You can configure the following:
• IGMP
• PIM
• SSM
• IP Multicast Routing
• Service Discovery Gateway
You can also review the following IP Multicast Optimization processes for your configuration:
• Optimizing PIM Sparse Mode in a Large IP Multicast Deployment
• Multicast Subsecond Convergence
• IP Multicast Load Splitting across Equal-Cost Paths
• SSM Channel Based Filtering for Multicast
• PIM Dense Mode State Refresh
• IGMP State Limit
OL-29890-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)
Where to Go Next for Wireless Multicast
Description
Displays the client-to-SGV mappings and
SGV-to-client mappings.
Displays IGMP querier information for the specified
VLAN.
Displays detailed IGMP querier information of all
the VLANs.
Displays MLD querier information for the specified
VLAN.
Displays MGIDs for IPv6 multicast group.
227