Where To Go Next For Igmp Proxy - Cisco Catalyst 3650 Configuration Manual

Configuring IGMP Proxy
Upstream Device Configuration
interface gigabitethernet 0/0/0
ip address 10.1.1.1 255.255.255.0
ip pim dense-mode
!
interface gigabitethernet 1/0/0
ip address 10.2.1.1 255.255.255.0
ip pim dense-mode
ip igmp unidirectional-link
!
interface gigabitethernet 2/0/0
ip address 10.3.1.1 255.255.255.0
Downstream Device Configuration
ip pim rp-address 10.5.1.1 5
access-list 5 permit 239.0.0.0 0.255.255.255
!
interface loopback 0
ip address 10.7.1.1 255.255.255.0
ip pim dense-mode
ip igmp helper-address udl ethernet 0
ip igmp proxy-service
!
interface gigabitethernet 0/0/0
ip address 10.2.1.2 255.255.255.0
ip pim dense-mode
ip igmp unidirectional-link
!
interface gigabitethernet 1/0/0
ip address 10.5.1.1 255.255.255.0
ip pim sparse-mode
ip igmp mroute-proxy loopback 0
!
interface gigabitethernet 2/0/0
ip address 10.6.1.1 255.255.255.0
Related Topics
Configuring the Upstream UDL Device for IGMP UDLR, on page 92
Configuring the Downstream UDL Device for IGMP UDLR with IGMP Proxy Support, on page 93
IGMP Proxy, on page 90

Where to Go Next for IGMP Proxy

You can configure the following:
• IGMP
• PIM
• SSM
• IP Multicast Routing
• Service Discovery Gateway
You can also review the following IP Multicast Optimization processes for your configuration:
• Optimizing PIM Sparse Mode in a Large IP Multicast Deployment
OL-29890-01
IP Multicast Routing Configuration Guide, Cisco IOS XE Release 3SE (Catalyst 3650 Switches)

Where to Go Next for IGMP Proxy

97