Cisco Catalyst 3650 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Switch
  5. Catalyst 3650
  6. Hardware installation manual

Cisco Catalyst 3650 Hardware Installation Manual

Hide thumbs Also See for Catalyst 3650:
Table of Contents

Advertisement

Quick Links

See also: Configuration Manual , Manual
Catalyst 3650 Switch
Hardware Installation Guide
April 2016
Cisco Systems, Inc.
www.cisco.com
Cisco has more than 200 offices worldwide.
Addresses, phone numbers, and fax numbers
are listed on the Cisco website at
www.cisco.com/go/offices.
Text Part Number: OL-29734-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco Catalyst 3650

Summary of Contents for Cisco Catalyst 3650

  • Page 1 Catalyst 3650 Switch Hardware Installation Guide April 2016 Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco website at www.cisco.com/go/offices. Text Part Number: OL-29734-01...
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    StackWise Ports 1-23 Power Supply Modules 1-23 Power Supply for Catalyst 3650-24TS/PS/TD/PD and 3650-48TS/PS/FS/TD/PD/FD/FQ/PQ/TQ Switches 1-24 Power Supply Module for Catalyst 3650-24PDM and 3650-48FQM Switches 1-25 Power Supply Module LEDs 1-26 Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-03...
  • Page 4 Contents RPS Connector 1-26 Cisco RPS 2300 1-26 Fan Modules 1-27 Fan Airflow for Catalyst 3650-24PDM and 3650-48FQM Switches 1-28 Management Ports 1-28 Ethernet Management Port 1-28 RJ-45 Console Port 1-28 Management Options 1-29 Network Configurations 1-30 Switch Installation C H A P T E R...
  • Page 5 Contents Power Supply Installation C H A P T E R Power Supply Module Overview Installation Guidelines Installing or Replacing an AC Power Supply Installing a DC Power Supply Equipment That You Need 3-10 Grounding the Switch 3-10 Installing the DC Power Supply in the Switch 3-13 Wiring the DC Input Power Source 3-13...
  • Page 6 Installing the Cisco Microsoft Windows USB Device Driver Uninstalling the Cisco Microsoft Windows USB Driver Uninstalling the Cisco Microsoft Windows USB Driver Using the Add or Remove Programs Utility Uninstalling the Cisco Microsoft Windows USB Driver Using the Setup.exe Program...
  • Page 7 Contents IP Settings Configuring the Setup Program Catalyst 3750-X and 3560-X Switch Hardware Installation Guide OL-19593-03...
  • Page 8 Contents Catalyst 3750-X and 3560-X Switch Hardware Installation Guide viii OL-19593-03...

  • Page 9: Preface

    Preface Purpose This guide describes the hardware features of the Catalyst 3650 switches. It describes the physical and performance characteristics of each switch, explains how to install a switch, and provides troubleshooting information. This guide does not describe system messages that you might receive or how to configure your switch.

  • Page 10: Related Documentation

    SAVE THESE INSTRUCTIONS The safety warnings for this product are translated into several languages in the Regulatory Compliance and Safety Information for the Catalyst 3650 Switch that is available on Cisco.com. The EMC regulatory statements are also included in that guide.

  • Page 11: Chapter 1 Product Overview

    C H A P T E R Product Overview The Catalyst 3650 series switches are Ethernet switches to which you can connect devices such as Cisco IP Phones, Cisco Wireless Access Points, workstations, and other network devices such as servers, routers, and other switches.
  • Page 12 2 1-Gigabit SFP uplink ports 2 10-Gigabit SFP+ uplink ports 640-W power supply WS-C3650-48FD-L LAN Base Stackable 48 10/100/1000 Full PoE downlink ports 2 1-Gigabit SFP uplink ports 2 10-Gigabit SFP+ uplink ports 1025-W power supply Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 13 IP Base Stackable 48 10/100/1000 Ethernet downlink ports 4 1-Gigabit SFP uplink ports 250-W power supply WS-C3650-24PS-S IP Base Stackable 24 10/100/1000 PoE+ downlink ports 4 1-Gigabit SFP uplink ports 640-W power supply Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 14 2 1-Gigabit SFP uplink ports 2 10-Gigabit SFP+ uplink ports 640-W power supply WS-C3650-48FD-S IP Base Stackable 48 10/100/1000 Full PoE downlink ports 2 1-Gigabit SFP uplink ports 2 10-Gigabit SFP+ uplink ports 1025-W power supply Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 15 IP Services Stackable 48 10/100/1000 Ethernet downlink ports 4 1-Gigabit SFP uplink ports 250-W power supply WS-C3650-24PS-E IP Services Stackable 24 10/100/1000 PoE+ downlink ports 4 1-Gigabit SFP uplink ports 640-W power supply Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 16 2 1-Gigabit SFP uplink ports 2 10-Gigabit SFP+ uplink ports 640-W power supply WS-C3650-48FD-E IP Services Stackable 48 10/100/1000 Full PoE downlink ports 2 1-Gigabit SFP uplink ports 2 10-Gigabit SFP+ uplink ports 1025-W power supply Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 17: Front Panel

    10/100/1000 Cisco UPOE™ ports – 100M/1G/2.5G/5G/10G Cisco UPOE™ ports – Uplink ports of one of these types or combinations of: • SFP module slots – SFP+ module slots – QSFP+ module slots – Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 18 All of the switches have similar components. See Figure 1-1 Figure 1-2 for examples. The illustrations of the Catalyst 3650 switch are not intended to depict any particular color Note scheme. They are provided as a reference for various features and markings described within this guide.
  • Page 19 USB mini-Type B (console) port Uplink ports Figure 1-3 Catalyst 3650-24PDM Switches Front Panel Mode button USB Type A storage port Status LEDs 10/100/1000 PoE+ Ethernet ports USB mini-Type B (console) port Uplink ports Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 20: 10/100/1000 Ethernet Ports

    70 meters and Category 6/6a UTP cable at maximum cable length of 100 meters. The 10G traffic requires Category 6 UTP cable at maximum cable length of 55 meters and Category 6a UTP cable at maximum cable length of 100 meters. Catalyst 3650 Switch Hardware Installation Guide 1-10 OL-29734-01...

  • Page 21: Poe+ And Cisco Upoe™ Ports

    Configurable support for Cisco intelligent power management, including enhanced power negotiation, power reservation, and per-port power policing. Depending on the installed power supply modules, each port can deliver up to 60 W of Cisco UPOE™. Table 1-13 on page 1-25 for the power supply matrix that defines the available PoE and PoE+, and Cisco UPOE™...

  • Page 22: Usb Type A Port

    The interface supports Cisco USB flash drives with capacities from 64 MB to 1 GB. Cisco IOS software provides standard file system access to the flash device: read, write, erase, and copy, as well as the ability to format the flash device with a FAT file system.

  • Page 23: Sfp, Sfp+ And Qsfp+ Modules

    The SFP modules have LC connectors for fiber-optic connections or RJ-45 connectors for copper connections. Use only Cisco SFP and SFP+ modules on the switch. For the latest information about supported SFP/SFP+ modules, refer to the Cisco Transceiver Modules Compatibility Matrix documentation at: http://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html...
  • Page 24 Product Overview Front Panel Figure 1-6 Switch Front Panel LEDs STAT (status) CONSOLE (USB mini-Type B (console) port DUPLX (duplex) SPEED SYST (system) STACK ACTV (active) 1. Only switches with PoE+ ports. Catalyst 3650 Switch Hardware Installation Guide 1-14 OL-29734-01...
  • Page 25 ACTV (active) STACK 1. Only switches with PoE+ ports. The illustrations of the Catalyst 3650 switch are not intended to depict any particular color Note scheme. They are provided as a reference for various features and markings described within this guide.

  • Page 26: Syst Led

    DUPLX Port duplex mode The port duplex mode: full duplex or half duplex. ACTV Active The active switch status. PoE+ port power The PoE+ port status. 1. Only switches with PoE+ ports. Catalyst 3650 Switch Hardware Installation Guide 1-16 OL-29734-01...
  • Page 27 Blinking green Switch is a standby member of a data stack and assumes active responsibilities if the current active switch fails. STACK No stack member corresponding to that member number. (stack member) Blinking green Stack member number. Green Member numbers of other stack member switches. Catalyst 3650 Switch Hardware Installation Guide 1-17 OL-29734-01...

  • Page 28: Usb Console Led

    USB console is disabled. Green USB console is enabled. ACTV LED Table 1-6 ACTV LED Color Description Switch is not the active switch. Green Switch is the active switch or a standalone switch. Catalyst 3650 Switch Hardware Installation Guide 1-18 OL-29734-01...

  • Page 29: Stack Led

    When you select the STACK LED mode, the representative STACK LEDs are green when the StackWise ports are up, and the representative STACK LEDs are amber when the ports are down. RPS LED The RPS LED is only available on Catalyst 3650-24PDM and 3650-48FQM switch models. Catalyst 3650 Switch Hardware Installation Guide 1-19...

  • Page 30: Poe+ Led

    Four uplink port LEDs labeled G1, G2, G3, G4 and TE1, TE2, TE3, TE4—This labeling represents • four slots supporting SFP and SFP+ modules. Ports labelled 1 to 8—This labelling represents eight ports supporting SFP and SPF+ modules. • Catalyst 3650 Switch Hardware Installation Guide 1-20 OL-29734-01...
  • Page 31 Link faults occur when noncompliant cabling is connected Caution to an SFP or SFP+ port. Use only standard-compliant cabling to connect to Cisco SFP and SFP+ ports. You must remove from the ports any cable or device that causes a link fault.

  • Page 32: Rear Panel

    AC OK (input) status LED MGMT (RJ-45 10/100/1000 management PS OK (output) status LED port) Fan module Power supply modules (AC power supply modules shown) Figure 1-11 Catalyst 3650-24PDM and 3650-48FQM Switches Rear Panel Catalyst 3650 Switch Hardware Installation Guide 1-22 OL-29734-01...

  • Page 33: Rj-45 Console Port Led

    Use only approved cables, and connect only to similar Cisco equipment. Equipment might be damaged Caution if connected to nonapproved Cisco cables or equipment. You cannot have a switch stack containing a mix of Catalyst 3650 and Catalyst 3850 switches. Note Power Supply Modules Power Supply for Catalyst 3650-24TS/PS/TD/PD and 3650-48TS/PS/FS/TD/PD/FD/FQ/PQ/TQ •...
  • Page 34 Do not operate the switch with one power supply module slot empty. For proper chassis cooling, both Caution power supply module slots must be populated, or with either a power supply or a blank cover. Power Supply for Catalyst 3650-24TS/PS/TD/PD and 3650-48TS/PS/FS/TD/PD/FD/FQ/PQ/TQ Switches For the following Catalyst switch models: WS-C3650-24TS-L...

  • Page 35: Power Supply Module For Catalyst 3650-24Pdm And 3650-48Fqm Switches

    Power Supply Module for Catalyst 3650-24PDM and 3650-48FQM Switches The Catalyst WS-3650-24PDM and WS-3650-48FQM switches come with fixed power supplies. Unlike the other Catalyst 3650 switches, they do not have slots for changing the power supplies. Catalyst 3650 Switch Hardware Installation Guide...

  • Page 36: Power Supply Module Leds

    Cisco RPS 2300 The Cisco RPS 2300 is a redundant power system that can support six external network devices and provide power to one or two failed devices at a time. It senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.

  • Page 37: Fan Modules

    Cisco.com at this URL: http://www.cisco.com/en/US/products/ps7148/prod_installation_guides_list.html The Cisco RPS 2300 has two output levels: –52 V and 12 V with a total maximum output power of 2300 All supported and connected switches can simultaneously communicate with the RPS 2300. You can...

  • Page 38: Fan Airflow For Catalyst 3650-24Pdm And 3650-48Fqm Switches

    Product Overview Rear Panel Fan Airflow for Catalyst 3650-24PDM and 3650-48FQM Switches The Catalyst 3650-24PDM and 3650-48FQM switches have fixed fan modules. Unlike the other Catalyst 3650 switches, they do not have slots for changing the fan modules. Figure 1-13...

  • Page 39: Management Options

    Cisco Network Assistant • Cisco Network Assistant is a PC-based network management GUI application for LANs. You can use the GUI to configure and manage switch clusters or standalone switches. Cisco Network Assistant is available at no cost and can be downloaded from this URL: http://www.cisco.com/pcgi-bin/tablebuild.pl/NetworkAssistant...

  • Page 40: Network Configurations

    Product Overview Management Options Network Configurations See the switch software configuration guide on Cisco.com for network configuration concepts and examples of using the switch to create dedicated network segments and interconnecting the segments through Gigabit Ethernet connections. Catalyst 3650 Switch Hardware Installation Guide...

  • Page 41: Preparing For Installation

    C H A P T E R Switch Installation This chapter describes how to install and connect a Catalyst 3650 switch. It also includes planning and cabling considerations for stacking switches. Read the topics and perform the procedures in this order: Preparing for Installation, page 2-1 •...

  • Page 42: Preparing For Installation

    VoIP and the emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your country. Statement 361 Attach only the following Cisco external power system to the switch: PWR-RPS2300. Statement 387 Warning Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.

  • Page 43: Installation Guidelines

    The SFP or SFP+ module minimum bend radius and connector length is met. See the SFP or – SFP+ module documentation for more information. Access to the rear of the rack is sufficient for connecting the optional Cisco Redundant Power – Supply (RPS) 2300 For switches with the optional 1025-W power supply module (PWR-C2-1025WAC) or the 1100-W •...

  • Page 44: Tools And Equipment

    • multirack assembly, the temperature around it might be greater than normal room temperature. Cisco Ethernet switches are equipped with cooling mechanisms, such as fans and blowers. However, • these fans and blowers can draw dust and other particles, causing contaminant buildup inside the chassis, which can result in system malfunction.

  • Page 45: Powering Off The Switch

    StackWise cable. Data stacks can be created with up to nine switches in a stack. • You cannot have a switch stack containing a mix of Catalyst 3650 and Catalyst 3850 switches. Note Data Stack Cabling Configurations Figure 2-1 is an example of a recommended configuration that uses the supplied 0.5-meter StackWise...

  • Page 46: Data Stack Bandwidth And Partitioning Examples

    (Figure 2-1) uses the supplied 0.5-meter StackWise cable. The example shows the full-ring configuration that provides redundant connections. Figure 2-1 Data Stacking the Catalyst 3650 Switches in a Rack or on a Table Using the 0.5-meter StackWise Cables PWR-C2-250WAC PWR-C2-640WAC...

  • Page 47: Power-On Sequence For Switch Data Stacks

    Switch Installation Planning a Switch Data Stack Figure 2-4 shows an example of a stack of Catalyst 3650 switches with incomplete StackWise cabling connections. This stack provides only half bandwidth and does not have redundant connections. Figure 2-4 Example of a Data Stack with Half Bandwidth Connections...

  • Page 48: Changes To Switch Stack Membership

    Note from the stack without splitting the stack. For conditions that can cause a stack reelection or to manually elect the active switch, see the stacking software configuration guide on Cisco.com at this URL: http://www.cisco.com/go/cat3650_docs Changes to Switch Stack Membership...

  • Page 49: Installing The Switch

    • After Installing the Switch, page 2-14 • The illustrations shown in this section show the Catalyst 3650-48 PoE+ switch as an example. You can install other Catalyst 3650 switches following the same procedures. Rack-Mounting To install the switch in a 19-inch rack, follow the instructions described in this section.

  • Page 50: Attaching The Rack-Mount Brackets

    To install the switch in a rack, use four Phillips flat-head screws to attach the long side of the brackets to the switch for the front- or rear-mounting positions (Figure 2-8). Use four screws to attach the brackets for the front-mounting position. Catalyst 3650 Switch Hardware Installation Guide 2-10 OL-29734-01...
  • Page 51 Chapter 2 Switch Installation Installing the Switch Figure 2-8 Attaching Brackets for 19-inch Racks -C 2 -6 4 Rear-mounting position Number-8 Phillips flat-head screws Front-mounting position Catalyst 3650 Switch Hardware Installation Guide 2-11 OL-29734-01...
  • Page 52 Chapter 2 Switch Installation Installing the Switch Figure 2-9 Attaching Brackets for Catalyst 3650-24PDM and 3650-48FQM Switches Catalyst 3650 Switch Hardware Installation Guide 2-12 OL-29734-01...

  • Page 53: Mounting The Switch In A Rack

    Front-mounting position Cable guide Number-12 or number-10 Phillips machine screws When you complete the switch installation, see the “After Installing the Switch” section on page 2-14 for more information about switch configuration. Catalyst 3650 Switch Hardware Installation Guide 2-13 OL-29734-01...

  • Page 54: After Installing The Switch

    • Configure the switch by running Express Setup to enter the initial switch configuration. For instructions, see the switch getting started guide that shipped with the switch and also on Cisco.com. • Use the CLI setup program to enter the initial switch configuration.

  • Page 55: Connecting To The Stackwise Ports

    Figure 2-14. Make sure that the Cisco logo is on the top side of the connector. Finger-tighten the screws (clockwise direction). Connect the other end of the cable to the port on the other switch and finger-tighten the screws. Avoid Step 5 overtightening the screws.
  • Page 56 Assembly screw StackWise port Cisco logo Figure 2-13 Installing the StackWise Adapter in a StackWise Port CO NS OL M GM T Torx T15 screwdriver StackWise adapter Assembly screw StackWise port Cisco logo Catalyst 3650 Switch Hardware Installation Guide 2-16 OL-29734-01...

  • Page 57: Installing And Removing Sfp And Sfp+ Modules

    See these sections for information on SFPs and SFP+: Installing SFP and SFP+ Modules, page 2-17 • Removing SFP or SFP+ Modules, page 2-19 • Installing SFP and SFP+ Modules Use only supported SFP modules on the switch. Catalyst 3650 Switch Hardware Installation Guide 2-17 OL-29734-01...
  • Page 58 If the module has a bale-clasp latch, close it to lock the SFP module in place. Step 5 Remove the SFP dust plugs and save. Step 6 Step 7 Connect the SFP cables. Catalyst 3650 Switch Hardware Installation Guide 2-18 OL-29734-01...

  • Page 59: Removing Sfp Or Sfp+ Modules

    • 100M/1G/2.5G/5G/10G Ethernet Port Connections, page 2-20 • PoE+ Port and Cisco UPOE™ Connections, page 2-20 Category 5e and Category 6 cables can store high levels of static electricity. Always ground the cables Caution to a suitable and safe earth ground before connecting them to the switch or other devices.

  • Page 60: 10/100/1000 Ethernet Port Connections

    10/100/1000 Ethernet port regardless of the type of device on the other end of the connection. See the switch software configuration guide or the switch command reference on Cisco.com for more information about enabling or disabling autonegotiation and auto-MDIX.
  • Page 61 PoE inline power supports devices compliant with the IEEE 802.3af standard, as well as prestandard Cisco IP Phones and Cisco Aironet Access Points. Each port can deliver up to 15.4 W of PoE. PoE+ inline power supports devices compliant with the IEEE 802.3at standard, by delivering up to 30 W of PoE+ power per port to all switch ports.

  • Page 62: Where To Go Next

    Use the CLI to configure the switch as a member of a cluster or as an individual switch from the • console. See the switch command reference on Cisco.com for information on using the CLI with the switch. Use the Cisco Prime Infrastructure application.

  • Page 63: Chapter 3 Power Supply Installation

    Installing a DC Power Supply, page 3-9 • Finding the Power Supply Module Serial Number, page 3-14 This chapter does not apply to Catalyst 3650-24PDM and 3650-48FQM switches. These switches come Note with fixed power supply modules and require no separate installation.
  • Page 64 • (available PoE with DC power supply) • (switch power supply requirements for PoE and PoE+, and Cisco UPOE™) • The input voltages of the power supplies are as follows: The 250-W, 640-W and 715-W AC power supply modules are autoranging units that support input •...
  • Page 65 AC O K PS O K PW R- C1 -7 15 W AC 715-W AC power supply module Release latch AC OK LED Power cord retainer PS OK LED Keying feature AC power cord connector Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 66 P S O K P W R -C 2- 10 25 W A C AC OK LED AC power cord connector PS OK LED Release latch AC power cord retainer 1025-W AC power supply module Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 67 250-W AC Power Supply Module R - C 2 - 2 5 0 W A AC OK LED AC power cord connector PS OK LED Release latch AC power cord retainer 250-W AC power supply module Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 68 If no power supply is installed in a power supply slot, install a power supply slot blank cover (Figure 3-8). Figure 3-8 Power Supply Slot Blank Cover Release handles Retainer clips The power supply modules have two status LEDs. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 69: Installation Guidelines

    For information on 250-W AC power supply support on the PoE-capable switch models, refer to the Release Notes for the Cisco Catalyst 3650 Switch on Cisco.com. Do not operate the switch with one power supply module slot empty. For proper chassis cooling, both Caution module slots must be populated, with either a power supply or a blank cover.

  • Page 70: Installing Or Replacing An Ac Power Supply

    When correctly inserted, the 250-W, 640-W and 715-W power supply modules (excluding the power cord retainer) are flush with the switch rear panel. The 1025-W and 1100-W power supply modules extend 1.5 inches from the switch rear panel. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 71: Installing A Dc Power Supply

    An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure that no exposed portion of the DC-input power source wire extends from the terminal block plug. Statement 122 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 72: Equipment That You Need

    This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the Warning absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024 Catalyst 3650 Switch Hardware Installation Guide 3-10 OL-29734-01...
  • Page 73 Using a ratcheting torque screwdriver, torque the ground-lug screws to 60 lbf-in. (960 ozf-in.). Step 6 Step 7 Connect the other end of the grounding wire to an appropriate grounding point at your site or to the rack. Catalyst 3650 Switch Hardware Installation Guide 3-11 OL-29734-01...
  • Page 74 Chapter 3 Power Supply Installation Installing a DC Power Supply Figure 3-13 Attaching the Ground Lug and Wire Assembly Single-hole ground screw and lug ring Dual-hole ground adapter and dual-hole lug Catalyst 3650 Switch Hardware Installation Guide 3-12 OL-29734-01...

  • Page 75: Installing The Dc Power Supply In The Switch

    (negative to negative, positive to positive) when connecting the wires to the terminal blocks. Connect the ground wire to a grounded metal rack or to earth ground if the switch is not in a grounded rack. Catalyst 3650 Switch Hardware Installation Guide 3-13 OL-29734-01...

  • Page 76: Finding The Power Supply Module Serial Number

    Step 7 the module LEDs. Finding the Power Supply Module Serial Number If you contact Cisco Technical Assistance regarding a power supply module, you need to know the serial number. See Figure 3-17 Figure 3-22 to find the serial number. You can also use the CLI to find out the serial number.
  • Page 77 Chapter 3 Power Supply Installation Finding the Power Supply Module Serial Number Figure 3-17 1100-W AC Power Supply Serial Number SN: XXXNNNNXXXX Figure 3-18 1025-W AC Power Supply Serial Number SN: AAANNNNXXXX Catalyst 3650 Switch Hardware Installation Guide 3-15 OL-29734-01...
  • Page 78 Chapter 3 Power Supply Installation Finding the Power Supply Module Serial Number Figure 3-19 715-W and 350-W AC Power Supply Serial Number SN: XXXNNNNXXXX R -C 1 -7 1 5 W A Catalyst 3650 Switch Hardware Installation Guide 3-16 OL-29734-01...
  • Page 79 Chapter 3 Power Supply Installation Finding the Power Supply Module Serial Number Figure 3-20 440-W DC Power Supply Serial Number SN: XXXNNNNXXXX R -C 1 -4 4 Catalyst 3650 Switch Hardware Installation Guide 3-17 OL-29734-01...
  • Page 80 Chapter 3 Power Supply Installation Finding the Power Supply Module Serial Number Figure 3-21 640-W and 250-W AC Power Supply Module Serial Number SN: AAANNNNXXXX Catalyst 3650 Switch Hardware Installation Guide 3-18 OL-29734-01...
  • Page 81 Chapter 3 Power Supply Installation Finding the Power Supply Module Serial Number Figure 3-22 640-W DC Power Supply Module Serial Number SN: AAANNNNXXXX Catalyst 3650 Switch Hardware Installation Guide 3-19 OL-29734-01...
  • Page 82 Chapter 3 Power Supply Installation Finding the Power Supply Module Serial Number Catalyst 3650 Switch Hardware Installation Guide 3-20 OL-29734-01...

  • Page 83: Chapter 4 Installing The Fan

    Fan Module Installation, page 4-2 • • Finding the Fan Module Serial Number, page 4-4 This chapter does not apply to Catalyst 3650-24PDM and 3650-48FQM switches. These switches come Note with fixed fan modules and require no separate installation. Overview The switch has three fan modules.

  • Page 84: Fan Module Installation

    A fan module that is only partially connected can disrupt the system operation. • • The switch supports hot swapping of the fan module. You can remove and replace the module without interrupting normal switch operation. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 85: Installing A Fan Module

    When the fan is operating, a green LED is on in the top left corner of the fan. See Figure 4-2. Warning Do not reach into a vacant slot when installing or removing a module. Exposed circuitry is an energy hazard. Statement 206 Figure 4-2 Installing the Fan Module Fan LED Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 86: Finding The Fan Module Serial Number

    Installing the Fan Finding the Fan Module Serial Number Finding the Fan Module Serial Number If you contact Cisco Technical Assistance regarding a fan module, you need to know the fan module serial number. See Figure 4-3 for the serial number location.

  • Page 87: Chapter 5 Troubleshooting

    SYSTEM LED turns solid green, the ACTV LED is green if the switch is acting as the active switch. POST failures are usually fatal. Contact your Cisco technical support representative if your switch does Note not pass POST.

  • Page 88: Switch Connections

    Try the cable in another port to see if the problem follows the cable. • For Catalyst 3650 switch StackWise cable, remove and inspect the cable and StackWise port for bent • pins or damaged connectors. If the StackWise cable is bad, replace it with a known good cable.

  • Page 89: Poe And Poe+ Port Connections

    Inspect the uplink port and SFP module. Exchange the suspect module with a known good module. • Verify that the module is supported on this platform. (The switch release notes on Cisco.com list the SFP and SFP+ modules that the switch supports.) •...

  • Page 90: Interface Settings

    You can enable UniDirectional Link Detection (UDLD) on the switch to help identify unidirectional link problems. For information about enabling UDLD on the switch, see the “Understanding UDLD” section in the software configuration guide on Cisco.com. Switch Performance Speed, Duplex, and Autonegotiation Port statistics that show a large amount of alignment errors, frame check sequence (FCS), or late-collisions errors, might mean a speed or duplex mismatch.

  • Page 91: Cabling Distance

    You can also configure the switch by using the CLI setup procedure. See Finding the Switch Serial Number If you contact Cisco Technical Assistance, you need to know the switch serial number. Figure 5-1 shows the serial number location. You can also use the show version privileged EXEC command to see the switch serial number.

  • Page 92: Replacing A Failed Data Stack Member

    Replacing a Failed Data Stack Member To replace a failed data stack member: The replacement switch must be a Catalyst 3650 switch. Power down the failed switch. Remove AC or DC input power. Make sure the replacement switch is powered off, and then connect it to the stack.

  • Page 93: Appendix

    & WS-C3650-48FQM switches (AC –5ºC to +45ºC, up to 10,000 feet (3000m) power supply installed) Short-term exceptional conditions –5ºC to +50ºC, up to 5000 feet (1500m) –5ºC to +50ºC, up to 10,000 feet (3000m) Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 94: Appendix 6 Technical Specification

    Stackwise adapter blanks, one power supply blank, and the default power supply shipped with the unit. Catalyst 3650 24-port non PoE switches 1.73 x 17.5 x 17.625 in. (4.4 x 44.5 x 44.8 cm) Catalyst 3650 24-port PoE+ switches 1.73 x 17.5 x 17.625 in.
  • Page 95 2. Occurring not more than in one-year period: 96 consecutive hours, 360 hours in total, or 15 occurrences. 3. Minimum ambient temperature for cold start is 32°F (0°C). 4. Occurring not more than in one-year period: 96 consecutive hours, 360 hours in total, or 15 occurrences. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 96: Power Supply Module Specifications

    1.58 x 3.75 x 11.75 in. (4.0 x 9.5 x 29.8 cm) Table 6-3 Power Specifications for AC Power 24- and 48-Port Switches Power Specifications Maximum output power PWR-C1-1100WAC: 1100 W PWR-C1-715WAC: 715 W PWR-C2-1025WAC: 1025 W PWR-C2-640WAC: 640 W PWR-C2-250WAC: 250 W Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 97: Power Supply Module Specifications

    PWR-C1-440WDC: –56 V@7.86 A PWR-C2-640WDC: +12 V @ 20.83 A, –54 V@7.36 A Voltage range domestic PWR-C1-440WDC: –36 VDC (minimum), –48 VDC (nominal), –72 VDC (maximum) PWR-C2-640WDC: –36 VDC (minimum) –48 VDC (nominal), –72 VDC (maximum) Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 98 PWR-C2-640WDC: 25 A 1. The total input and total output BTU ratings refer to input power to the power supply and output power to the switch. The BTU ratings are based on –48 VDC (nominal). Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 99: Fan Module Specifications

    Up to 16,400 ft (5,000 m) Physical Specification Dimensions (H x D x W) 1.62 x 1.73 x 4.24 in. (4.11 x 4.39 x 10.76 cm) Weight 0.2 lb (0.07 kg) Operating Specification Airflow 20 cfm Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 100: Fan Module Specifications

    Appendix 6 Technical Specifications Fan Module Specifications Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 101: Appendix

    10/100/1000 Ports The 10/100/1000 Ethernet ports on switches use RJ-45 connectors and Ethernet pinouts. Figure 7-1 10/100/1000 Port Pinouts Label 4 5 6 7 8 TP0+ TP0- TP1+ TP2+ TP2- TP1- TP3+ TP3- Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 102: 1G/2.5G/5G/10G Ports

    When ordering or using CX1 cables, ensure that the version identifier is 2 or higher. Note The 10-Gigabit Ethernet optical modules use the connectors shown in Figure 7-4 Figure 7-5. Figure 7-3 10-Gigabit Ethernet CX1 Copper Connector (example) Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 103: Sfp And Sfp+ Modules

    The switch supports the SFP module patch cable, a 0.5-meter, copper, passive cable with SFP module connectors at each end (Figure 7-7). This cable can be used (only with 1-Gigabit Ethernet SFP ports) to connect two Catalyst 3650 switches in a cascaded configuration. Figure 7-4 Duplex LC Cable Connector Figure 7-5...

  • Page 104: 10/100/1000 Ethernet Management Port

    The USB console port uses a USB Type A to 5-pin mini-Type B cable, shown in Figure 7-10. The USB Type A-to-USB mini-Type B cable is not supplied. You can order an accessory kit (part number 800-33434) that contains this cable. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 105: Cable And Adapter Specifications

    Four Twisted-Pair Cable Pinouts, page 7-8 • Two Twisted-Pair Cable Pinouts, page 7-9 • Identifying a Crossover Cable, page 7-9 • Console Port Adapter Pinouts, page 7-9 • StackWise Cables Figure 7-11 shows a StackWise stacking cable. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

  • Page 106: Stackwise Cables Minimum Bend Radius And Coiled Diameter

    Appendix 7 Connector and Cable Specifications Cable and Adapter Specifications Figure 7-11 StackWise Stacking Cable You can order these StackWise cables (nonhalogen) from your Cisco sales representative: STACK-T2-50CM= (0.5-meter cable) • STACK-T2-1M= (1-meter cable) • STACK-T2-3M= (3-meter cable) • StackWise Cables Minimum Bend Radius and Coiled Diameter Table 7-1 specifies the minimum bend radius and coiled diameter for each StackWise cable.

  • Page 107: Locating The Stackwise Adapter Serial Number

    Appendix 7 Connector and Cable Specifications Cable and Adapter Specifications Locating the StackWise Adapter Serial Number If you contact Cisco Technical Assistance regarding a StackWise adapter, you need to know the serial number. See Figure 7-12 to find the serial number.

  • Page 108: Sfp And Sfp+ Module Cable Specifications

    Copper 1000BASE-T SFP module transceivers use standard four twisted-pair, Category 5 cable at lengths up to 328 feet (100 meters). For cabling specifications, refer to the Cisco Transceiver Modules data sheet at: http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheets_list.html Four Twisted-Pair Cable Pinouts...

  • Page 109: Two Twisted-Pair Cable Pinouts

    RJ-45-to-DB-9 adapter cable to connect the switch console port to a PC console port. You need to provide an RF-45-to-DB-25 female DTE adapter if you Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 110 The RJ-45-to-DB-25 female DTE adapter is not supplied with the switch. You can order a kit with the Note adapter (part number ACS-DSBUASYN=) from Cisco. Table 7-3 Console Port Signaling Using a DB-25 Adapter Switch Console RJ-45-to-DB-25 Console Port (DTE) Terminal Adapter Device Signal DB-25 Pin Signal Catalyst 3650 Switch Hardware Installation Guide 7-10 OL-29734-01...

  • Page 111: Appendix

    This appendix provides a CLI-based setup procedure for a Catalyst 3650 standalone switch or a switch stack. To set up the switch by using Express Setup, see the Catalyst 3650 Switch Getting Started Guide. Before connecting the switch to a power source, review the safety warnings thoroughly.

  • Page 112: Accessing The Cli Through A Console Port

    Accessing the CLI Through a Console Port You can enter Cisco IOS commands and parameters through the CLI. If you have stacked Catalyst 3650 switches, connect to the 10/100/1000 Ethernet management port or Note console port of one of the stack switches. You can perform the initial configuration for the entire stack on any switch in the stack.

  • Page 113: Installing The Cisco Microsoft Windows Usb Device Driver

    Configuring the Switch with the CLI-Based Setup Program Accessing the CLI Figure 8-1 Connecting the USB Console Cable to the Catalyst 3650 Switch Connect a USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B Step 2 (5-pin-connector) USB console port.

  • Page 114: Uninstalling The Cisco Microsoft Windows Usb Driver

    Configuring the Switch with the CLI-Based Setup Program Accessing the CLI Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it. Step 1 You can download the driver file from the Cisco.com site for downloading the switch software.

  • Page 115: Uninstalling The Cisco Microsoft Windows Usb Driver Using The Setup.exe Program

    You must assign an IP address and other configuration information necessary for the switch to communicate with the local routers and the Internet. This information is also needed to useDevice Manager or Cisco Network Assistant to configure and manage the switch. IP Settings You need this information from your network administrator: •...
  • Page 116 Step 8 (Optional) Configure Simple Network Management Protocol (SNMP) by responding to the prompts. You can also configure SNMP later through the CLI, Device Manager,or the Cisco Network Assistant application. To configure SNMP later, enter no. Configure SNMP Network Management? [no]: no...
  • Page 117 After you complete the setup program, the switch can run the default configuration that you created. To change this configuration or to perform other management tasks, enter commands at the prompt Switch> or use Cisco Network Assistant, or another management tool for further configuration. Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...
  • Page 118 Appendix 8 Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information Catalyst 3650 Switch Hardware Installation Guide OL-29734-01...

Table of Contents